Kevin Korb (kmk@crc.com)
Wed, 3 Feb 1999 18:04:13 -0500 (EST)
It seems to work, what exactly does the TMO error mean?
paride: version 1.02 installed
paride: epat registered as protocol 0
pd: pd version 1.04s, major 45, cluster 64, nice 0
pda: epat 1.01, Shuttle EPAT chip c6 at 0x278, mode 3 (EPP-8), delay 1
pda: Maxtor 91360D8, master, 26563824 blocks [12970M], (26353/16/63), fixed media
pda:pda: do_pd_read: status = 0x10000 = TMO
pda1
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
Kevin Korb Phone: (407) 354-0047 x2122
Systems Administrator Email:
Coleman Research Corp. kmk@crc.com (work)
Launch Systems Group kmk@sanitarium.net (personal)
Orlando, Florida http://www.sanitarium.net/
PGP public key available: finger:kmk@magicnet.net
~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
On Wed, 3 Feb 1999 grant@torque.net wrote:
> > pda: epat 1.01, Shuttle EPAT chip c6 at 0x278, mode 3 (EPP-8), delay 1
> > pda: Maxtor 91360D8, master, 63504 blocks [31M], (63/16/63), fixed media
> > pda:pda: do_pd_read: status = 0x10000 = TMO
> > pda1
>
> > Now it sees my nice big 13g as a 31m ;-(
>
> Argh. I need new glasses ! At least the error is obvious.
>
> > > if (cyls == 16383) PD.cylinders = word_val(56);
>
> That should read: word_val(54)
>
> The TMO error is curious though, I can't quite explain it. Lets see if
> it persists after you fix the stupid error.
>
> --------------------------------------------------------------------------
> Grant R. Guenther grant@torque.net
> --------------------------------------------------------------------------
>
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 03 Feb 1999 - 18:05:54 EST