Raul Leote de Carvalho (rlcarval@nskip2.phys.ucl.ac.uk)
Wed, 28 Apr 1999 16:00:23 +0100 (GMT)
> I am having problems getting my HP 7200e
> to work. I first tried to set the parallel
> port to EPP. Unfortunately, my PC gives me
> two possibilities only: PS/2 and AT. I
> have tried both. With PS/2, after doing:
>
> insmod paride
> insmod epat
> insmod pg
>
> I find with dmesg
>
> pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 2 (8-bit), delay 1
> pg0: HP CD-Writer+ 7200, slave
With PS/2, loading pg with
insmod pg drive0=0x378,0,0,2,1,0
to force the port delay to 0 did the trick!
I can now burn CDs with cdrecord.
Thanks to all,
Raul
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 28 Apr 1999 - 10:58:59 EDT