Pedro Andrés Aranda Gutiérrez (paag@tid.es)
Sun, 02 May 1999 10:53:31 +0200
Hi,
Ever since I changed my good old NEC Versa for this d... sh.. of an
Acer, I've
had all kind of trouble. In the partport front I'm fighting to get my MO
drive
to use an 8 bit mode (at least). But the battke seems quite lost.
I'm attaching all the info I could get from my box. If someone could
help...
Thanks,
Pedro A. Aranda
paag@tid.es
Linux version 2.2.7 (Linux version 2.2.7 (root@localhost.localdomain) (gcc version 2.7.2.3) #6 Thu Apr 29 18:17:33 CEST 1999
Detected 266619874 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 266.24 BogoMIPS
Memory: 63520k/65536k available (716k kernel code, 412k reserved, 852k data, 36k init)
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfd9e3
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DTCA-24090, ATA DISK drive
hdc: UJDA150, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTCA-24090, 3909MB w/468kB Cache, CHS=993/128/63, (U)DMA
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 64508k swap-space (priority -1)
Linux PCMCIA Card Services 3.0.9
kernel build: 2.2.7 #6 Thu Apr 29 18:17:33 CEST 1999
options: [pci] [apm]
Intel PCIC probe:
TI 1250A PCI-to-CardBus at bus 0 slot 6, mem 0x68000000, 2 sockets
host opts [0]: [pwr save] [pci + serial irq] [no pci irq] [lat 168/176] [bus 32/34]
host opts [1]: [pwr save] [pci + serial irq] [no pci irq] [lat 168/176] [bus 35/37]
ISA irqs (scanned) = 3,4,7,9,10 status change on irq 10
cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x104f
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
tty01 at 0x02f8 (irq = 3) is a 16550A
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
registered device ppp0
paride: version 1.04 installed
paride: epat registered as protocol 0
pd: pd version 1.05, major 45, cluster 64, nice 0
parport0: PC-style at 0x378, irq 7 [SPP,ECP,ECPPS2]
parport0: Unspecified, Unknown vendor Unknown device
pda: Sharing parport0 at 0x378
pda: epat 1.01, Shuttle EPAT chip c5 at 0x378, mode 0 (4-bit), delay 1
pda: FUJITSU M2541B, master, 445536 blocks [217M], (442/16/63), removable media
pda: pda1
VFS: Disk change detected on device pd(45,1)
pda: FUJITSU M2541B, master, 445536 blocks [217M], (442/16/63), removable media
pda: pda1
--------------
/proc/parport/0/autoprobe
--------------
MODEL:Unknown device;
MANUFACTURER:Unknown vendor;
-
--------------
/proc/parport/0/devices
--------------
pda
-
--------------
/proc/parport/0/hardware
--------------
base: 0x378
irq: 7
dma: none
modes: SPP,ECP,ECPPS2
-
--------------
/proc/parport/0/irq
--------------
7
-
--------------
/proc/pci
--------------
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 440BX - 82443BX Host (no AGP) (rev 2).
Medium devsel. Master Capable. Latency=64.
Prefetchable 32 bit memory at 0x0 [0x8].
Bus 0, device 2, function 0:
VGA compatible controller: Neomagic MagicGraph NM2160 (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=128. Min Gnt=16.Max Lat=255.
Prefetchable 32 bit memory at 0xfd000000 [0xfd000008].
Non-prefetchable 32 bit memory at 0xfea00000 [0xfea00000].
Non-prefetchable 32 bit memory at 0xfed00000 [0xfed00000].
Bus 0, device 4, function 0:
ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 4, function 1:
IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xfcd0 [0xfcd1].
Bus 0, device 4, function 2:
USB Controller: Intel 82371AB PIIX4 USB (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. Latency=64.
I/O at 0xfce0 [0xfce1].
Bus 0, device 4, function 3:
Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
Medium devsel. Fast back-to-back capable.
Bus 0, device 5, function 0:
Multimedia audio controller: Unknown vendor Unknown device (rev 0).
Vendor id=125d. Device id=1968.
Medium devsel. Fast back-to-back capable. IRQ 5. Master Capable. Latency=64. Min Gnt=2.Max Lat=24.
I/O at 0xf800 [0xf801].
Bus 0, device 6, function 0:
CardBus bridge: Texas Instruments PCI1250 (rev 2).
Medium devsel. Master Capable. Latency=168. Min Gnt=192.Max Lat=7.
Bus 0, device 6, function 1:
CardBus bridge: Texas Instruments PCI1250 (rev 2).
Medium devsel. Master Capable. Latency=168. Min Gnt=192.Max Lat=7.
-
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Sun 02 May 1999 - 04:54:28 EDT