Douglas Baker (djb6@hotmail.com)
Wed, 13 Oct 1999 07:44:06 PDT
I have got a hp 6020es cdwriter working on a pentium 166. using the epst and
ppscsi modules with kernel 2.2.10. (Single speed only)
There are however, a few problems with the disks it writes. The 6020 can
read the disks it produces but I have found only one other machine a Dell
Optiplex with NT that can read the disks I have made. I have tried other
Linux machines a Sun, SGI and a couple of Windows95 boxes.
Is there an option I need to specify when I do either the mkisofs or
cdrecord step?
I use the standard inputs from the CD-writer HOWTO for both the mkisofs and
cdrecord steps
mkisofs -r -o cd-image private_collection/ (-R also tried no
improvement)
cdrecord -v speed=1 dev=0,4,0 -data cd-image
There are also a few error messages from cdrecord, sample output shown
below.
# cdrecord -v -dummy speed=1 dev=0,4,0 -data cd-image
Cdrecord release 1.8a29 Copyright (C) 1995-1999 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,4,0'
scsibus: 0 target: 4 lun: 0
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'HP '
Identifikation : 'CD-Writer 6020 '
Revision : '1.07'
Device seems to be: Philips CDD-2600.
Using driver for Philips CDD-522 (philips_cdd522).
Driver flags :
FIFO size : 4194304 = 4096 KB
Track 01: data 70 MB
Total size: 81 MB (08:02.42) = 36182 sectors
Lout start: 81 MB (08:04/32) = 36182 sectors
Current Secsize: 2048
ATIP info from disk:
Is not unrestricted
Disk application code: 0
ATIP start of lead in: -11324 (97:31/01)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 323667
Starting to write CD/DVD at speed 1 in dummy mode for single session.
Last chance to quit, starting dummy write in 1 seconds.
Waiting for reader process to fill input-buffer ... input-buffer ready.
Starting new track at sector: 0
Track 01: 70 of 70 MB written (fifo 100%).
Track 01: Total bytes read/written: 74096640/74096640 (36180 sectors).
Writing time: 491.064s
Fixating...
cdrecord: Input/output error. philips fixation: scsi sendcmd: retryable
error
CDB: E9 00 00 00 00 00 00 00 01 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 80 00 00 2A 0A 00 00 00 00 B1 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0xB1 Qual 0x00 (current program area empty) Fru 0x0
Sense flags: Blk -2147483606 (valid)
cmd finished after 49.015s timeout 480s
Fixating time: 49.040s
cdrecord: fifo had 2262 puts and 2262 gets.
cdrecord: fifo was 0 times empty and 1417 times full, min fill was 96%.
The errors from another write (not a dummy if that makes a difference)
cdrecord: Input/output error. philips fixation: scsi sendcmd: retryable
error
CDB: E9 00 00 00 00 00 00 00 01 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 09 80 00 00 00 0A 00 00 00 00 D0 00 00 00
Sense Key: 0x9 Vendor Unique, Segment 0
Sense Code: 0xD0 Qual 0x00 (recovery needed) Fru 0x0
Sense flags: Blk -2147483648 (valid)
cmd finished after 49.012s timeout 480s
Fixating time: 49.037s
cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd:
retryable error
CDB: 1E 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 09 80 00 00 00 0A 00 00 00 00 D0 00 00 00
Sense Key: 0x9 Vendor Unique, Segment 0
Sense Code: 0xD0 Qual 0x00 (recovery needed) Fru 0x0
Sense flags: Blk -2147483648 (valid)
cmd finished after 0.008s timeout 40s
cdrecord: fifo had 19843 puts and 19843 gets.
cdrecord: fifo was 0 times empty and 12954 times full, min fill was 94%.
Hope this is of some use, keep up the good work.
Douglas Baker
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 13 Oct 1999 - 10:50:12 EDT