Tim Waugh (twaugh@redhat.com)
Wed, 17 Nov 1999 12:53:15 +0000 (GMT)
On Wed, 17 Nov 1999, Joerg Liedtke wrote:
> Output of "dmesg" tells me nothing about recognized printer ports, also
> "lsmod" shows me that the "parport" module or "lp" is not loaded.
And what does 'dmesg' say after you've loaded lp (modprobe lp)?
> /etc/conf.modules:
> -------------------------------
> ...
> alias parport_lowlevel parport_pc
> options parport_pc io=0x3bc,0x278 irq=none,none
>
> # If you have multiple parallel ports, specify them this way:
> # options parport_pc io=0x378,0x278 irq=none,none
You don't really need to specify anything here.
Tim.
*/
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 17 Nov 1999 - 07:54:51 EST