Praveen Srinivasan (psrin0@pop.uky.edu)
Wed, 29 Dec 1999 22:13:33 -0500
I also got the following error message:
PYXIS Macine check: vector=0x660 pc=0xfffffc00003104a0 code=0x202
In my System.map file, the line that corresponds to the above pc is:
fffffc00003104a0 T entInt
Hope this helps,
Praveen Srinivasan
Praveen Srinivasan wrote:
> I guess it kind of died off, but I posted earlier about my alpha 164sx
> with a Lava Parallel PCI card and an Avatar Shark drive on it. I patched
> the 2.2.13 kernel with the patch for parallel PCI support, but that
> didn't seem to help. I still get data corruption with those messages
> (see dmesg at bottom; I think the first time I tried to insmod pd, the
> drive wasn't totally initialized, so I did it a 2nd time and it worked).
> The drive works fine in Windows and x86 linux. If there's someway I can
> help with tracking this bug down, I'd be more than willing to do it.
>
> Thanks
> for your help,
>
> Praveen Srinivasan
>
> dmesg:
>
> 4>PCI: Probing PCI hardware
> SMC37c669 Super I/O Controller found @ 0x3f0
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> Starting kswapd v 1.5
> parport0: PC-style at 0x8000 [SPP,PS2,EPP]
> matroxfb: Matrox unknown G200 (PCI) detected
> matroxfb: 640x480x0bpp (virtual: 640x13104)
> matroxfb: framebuffer at 0x9000000, mapped to 0x0000000009000000, size
> 8388608
> Console: switching to colour frame buffer device 80x60
> fb0: MATROX VGA frame buffer device
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> keyboard: Too many NACKs -- noisy kbd cable?
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> js: Version 1.2.13 using 530 MHz RPCC timer.
> js: no joysticks found
> RAM disk driver initialized: 16 RAM disks of 4096K size
> Uniform Multi-Platform E-IDE driver Revision: 6.20
> CY82C693: IDE controller on PCI bus 00 dev 41
> CY82C693: not 100% native mode: will probe irqs later
> CY82C693U driver v0.34 99-09-03 Andreas S. Krebs (akrebs@altavista.net)
> ide0: BM-DMA at 0x1040-0x1047, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x1048-0x104f, BIOS settings: hdc:pio, hdd:DMA
> hda: Maxtor 91728D8, ATA DISK drive
> hdd: ATAPI CD ROM DRIVE 50X MAX, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: Maxtor 91728D8, 16479MB w/512kB Cache, CHS=33483/16/63, (U)DMA
> hdd: ATAPI 50X CD-ROM drive, 128kB Cache
> Uniform CDROM driver Revision: 2.56
> Floppy drive(s): fd0 is 2.88M
> FDC 0 is a post-1991 82077
> md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
> Partition check:
> hda: hda1 hda2 hda3 < hda5 >
> NTFS version 990411
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 96k freed
> Adding Swap: 131496k swap-space (priority -1)
> paride: version 1.04 installed
> paride: epat registered as protocol 0
> pd: pd version 1.05, major 45, cluster 64, nice 0
> pda: Sharing parport0 at 0x8000
> pda: epat 1.01, Shuttle EPAT chip c6 at 0x8000, mode 3 (EPP-8), delay 1
> pda: , master, 8998912 blocks [4394M], (208/208/208), removable media
> pda: Initialise device parameters: status = 0x1d0d0 = SEEK READY BUSY
> IDNF UNC ??? TMO
> pda:pda: do_pd_read: status = 0x1d0d0 = SEEK READY BUSY IDNF UNC ???
> TMO
> pda: do_pd_read_drq: status = 0x1d0d0 = SEEK READY BUSY IDNF UNC ??? TMO
>
> unknown partition table
> pd: pd version 1.05, major 45, cluster 64, nice 0
> pda: Sharing parport0 at 0x8000
> pda: epat 1.01, Shuttle EPAT chip c6 at 0x8000, mode 3 (EPP-8), delay 1
> pda: AVATAR AR2250, master, 489472 blocks [239M], (956/16/32),
> removable media
> pda: pda1
> VFS: Disk change detected on device pd(45,1)
> pda: AVATAR AR2250, master, 489472 blocks [239M], (956/16/32),
> removable media
> pda: pda1
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> PYXIS machine check: vector=0x660 pc=0xfffffc00003104a0 code=0x202
> machine check type: unknown
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_write: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_write: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
> pda: do_pd_read: status = 0x1ffff = ERR INDEX ECC DRQ SEEK WRERR READY
> BUSY AMNF TK0NF ABRT MCR IDNF MC UNC ??? TMO
>
> __________________________________________
> NetZero - Defenders of the Free World
> Get your FREE Internet Access and Email at
> http://www.netzero.net/download/index.html
>
> -- To unsubscribe, send mail to: linux-parport-request@torque.net --
> -- with the single word "unsubscribe" in the body of the message. --
__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 29 Dec 1999 - 22:19:14 EST