RE: [PARPORT] parallel-PCI card

Olivier Thomas (
Sat, 12 Feb 2000 11:07:34 +0900

The result of the 'lspci -v' gives me the following about my PCI-parallel
port card:
00:0e.0 Parallel controller: Lava Computer mfg Inc: Unknown device 8800
(prog-if 01)
        Flags: slow devsel, IRQ 9
        I/O ports at d020

Do you think I need to upgrade to 2.2.14 ?

-----Original Message-----
From: Tim Waugh []
Sent: Friday, February 11, 2000 8:36 PM
To: Olivier Thomas
Subject: Re: [PARPORT] parallel-PCI card

On Fri, 11 Feb 2000, Olivier Thomas wrote:

> I have a Red Hat 6.0 (kernel 2.2.5-22) and I would like to install a
> second printer on a parallel-PCI card. The name of this card is "Turbo
> Parallel" from Boca Research.

This card might be supported with kernel 2.2.14, depending on exactly
which card it is. What are the vendor and product IDs? It will tell
you in the output of 'lspci -vv' if you have pci-utils installed.


-- To unsubscribe, send mail to: --
-- with the single word "unsubscribe" in the body of the message. --

This archive was generated by hypermail 2.0b3 on Fri 11 Feb 2000 - 20:58:37 EST