Russ.Dill@asu.edu
Fri, 18 Feb 2000 05:02:56 -0700 (MST)
I have gotten my scanport sq1030 working with onscsi and the sane microtek
modules, but I'm having trouble with transfer modes. I can only set nybble, or
PS/2. I have an ASUS P2/B (440BX) with the parport set to ECP, dma3 in the
bios. some of the files in /proc follow....
PS/2 mode is dog slow...even preview hicups a few times, there has got to be
a way to go to EPP (even possibly that mode 6 that looks so enticing, EPP
32-bit)
/proc/sys/dev/parport/parport1/hardware
base: 0x378 (0x778)
irq: 7
dma: 3
modes: PCSPP,TRISTATE,EPP,ECP,DMA
/proc/sys/dev/parport/parport1/autoprobe
CLASS:PRINTER;
MODEL:BJC-4300;
MANUFACTURER:Canon;
DESCRIPTION:Canon BJC-4300;
COMMAND SET:BJ,LQ,BJL,BJRaster,BSCC;
/proc/sys/dev/parport/parport1/devices/lp
/proc/sys/dev/parport/parport1/devices/onscsi.1
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: Model: Scanner 300A4 Rev: 4.11
Type: Scanner ANSI SCSI revision: 02
/proc/scsi/onscsi/0
ident: onscsi 0.90 (0.91), OnSpec 90c26
base port: 0x378
mode: 1
mode name: PS/2
delay: 1
nice: 0
verbose: 0
quiet: 0
tot_cmds: 24
tot_bytes: 1122
tot_errs: 0
parport device: parport1
claimed: 0
/var/log/kern.log
onscsi.1: onscsi 0.90 (0.91), OnSpec 90c26 at 0x378 mode 1 (PS/2) dly 1 nice 0
sg 16
scsi0 : onscsi
scsi : 1 host.
Vendor: Model: Scanner 300A4 Rev: 4.11
Type: Scanner ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 5, lun 0
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Fri 18 Feb 2000 - 07:10:50 EST