Could someone read this message and help me ???
Thanks a lot,
Sylvain
> -----Message d'origine-----
> De: Brunet, Sylvain
> Date: vendredi 10 mars 2000 10:09
> À: 'linux-parport@torque.net'
> Objet: PLEASE HELP ME ...
> Importance: Faible
>
> hello everybody ,
> (sorry , I know that my english is very bad ...So I hope
> you will be able to understand me ...)
>
> I've just installed linux redhat 6.0 on my dell latitude xpi 133 using
> the hard disk for installation...
> now I want to make my // cdrom device work...
> My cdrom is a creative-labs (x4 MATSUSHITA) inserted in a
> // ide ATAPI kingbyte adapter box.
> (It work fine with DOs drivers or Win95/98 drivers)
>
> I do the following after linux boot :
> insmod parport
> insmod paride
> insmod kbic
> insmod pcd
>
> All of these seem to work fine, but when i'm trying to mount the cdrom
> => mount /dev/pcd0 /mnt/cdrom
> The system hangs for a few minutes and i get an error message.
> Here is the output of dmesg :
>
> Linux version 2.2.5-15 (root@porky.devel.redhat.com) (gcc version
> egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09
> EDT 1999
> Detected 133639948 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 53.25 BogoMIPS
> Memory: 22584k/24576k available (996k kernel code, 412k reserved, 524k
> data, 60k init)
> VFS: Diskquotas version dquot_6.4.0 initialized
> CPU: Intel Pentium 75 - 200 stepping 0c
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> Intel Pentium with F0 0F bug - workaround enabled.
> POSIX conformance testing by UNIFIX
> PCI: PCI BIOS revision 2.10 entry at 0xfbcf0
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS02 at 0x03e8 (irq = 4) is a 16550A
> pty: 256 Unix98 ptys configured
> apm: BIOS version 1.1 Flags 0x03 (Driver version 1.9)
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PCI_IDE: unknown IDE controller on PCI bus 00 device 40, VID=1095,
> DID=0643
> PCI_IDE: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xfe00-0xfe07, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0xfe08-0xfe0f, BIOS settings: hdc:pio, hdd:pio
> hda: IBM-DPRA-21215, ATA DISK drive
> ide2: ports already in use, skipping probe
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: IBM-DPRA-21215, 1160MB w/64kB Cache, CHS=589/64/63
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> 8regs : 140.208 MB/sec
> 32regs : 123.444 MB/sec
> using fastest function: 8regs (140.208 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hda: hda1 hda2 < hda5 hda6 >
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 60k freed
> Adding Swap: 50364k swap-space (priority -1)
> Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> SB 3.01 detected OK (220)
> YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
> 1993-1996
> Linux PCMCIA Card Services 3.0.9
> kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999
> options: [pci] [cardbus] [apm]
> Intel PCIC probe:
> Vadem VG-469 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
> host opts [0]: none
> host opts [1]: none
> ISA irqs (scanned) = 3,4,7,9,10,11,15 status change on irq 15
> cs: IO port probe 0x1000-0x17ff: excluding 0x1200-0x1207 0x1220-0x122f
> 0x1330-0x1337 0x1388-0x138f
> cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f
> cs: IO port probe 0x0a00-0x0aff: clean.
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> nfsd_init: initialized fhcache, entries=256
> paride: version 1.04 installed
> paride: k951 registered as protocol 0
> paride: k971 registered as protocol 1
> pcd: pcd version 1.07, major 46, nice 0
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport0: no IEEE-1284 device present.
> pcd0: Sharing parport0 at 0x378
> pcd0: kbic 1.01, KingByte KBIC-951A at 0x378, mode 2 (8-bit), delay 1
> pcd0: Slave: CD-ROM CR-581
> Uniform CDROM driver Revision: 2.54
> VFS: Disk change detected on device pcd(46,0)
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> end_request: I/O error, dev 2e:00 (PCD), sector 2
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> end_request: I/O error, dev 2e:00 (PCD), sector 2
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> end_request: I/O error, dev 2e:00 (PCD), sector 0
> FAT bread failed
>
>
>
> THANK YOU VERY MUCH FOR YOUR HELP,
>
> Sylvain BRUNET
>
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Tue Mar 14 2000 - 07:53:39 EST