Could someone read this message and help me ???
Thanks a lot,
Sylvain
(Without any help, I will be oblige to reinstall Windows on my PC ...
Sniff, Sniff, Sniff, please help me ...)
I've just installed linux redhat 6.0 on my dell latitude xpi 133 using
the hard disk for installation...
now I want to make my // cdrom device work...
My cdrom is a creative-labs (x4 MATSUSHITA) inserted in a
parallel ide ATAPI kingbyte adapter box.
(It work fine with DOs drivers or Win95/98 drivers)
I do the following after linux boot :
insmod parport
insmod paride
insmod kbic
insmod pcd
All of these seem to work fine, but when i'm trying to mount the cdrom
=> mount /dev/pcd0 /mnt/cdrom
I obtain the same results with "mount -t iso9660 /dev/pcd0 /mnt/cdrom" ...
The system hangs for a few minutes and i get an error message.
Here is the output of dmesg :
> Linux version 2.2.5-15 ("root@porky.devel.redhat.com
<mailto:root@porky.devel.redhat.com?Subject=Re:%20[PARPORT]%20RE:%20PLEASE%2
0HELP%20ME%20...&In-Reply-To=<5526BD8656D5D211A72B0090274603502CB7B1@CARBO-M
AIL>) (gcc version
> egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 22:21:09
> EDT 1999
> Detected 133639948 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 53.25 BogoMIPS
> Memory: 22584k/24576k available (996k kernel code, 412k reserved, 524k
> data, 60k init)
> VFS: Diskquotas version dquot_6.4.0 initialized
> CPU: Intel Pentium 75 - 200 stepping 0c
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> Intel Pentium with F0 0F bug - workaround enabled.
> POSIX conformance testing by UNIFIX
> PCI: PCI BIOS revision 2.10 entry at 0xfbcf0
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> Initializing RT netlink socket
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS02 at 0x03e8 (irq = 4) is a 16550A
> pty: 256 Unix98 ptys configured
> apm: BIOS version 1.1 Flags 0x03 (Driver version 1.9)
> Real Time Clock Driver v1.09
> RAM disk driver initialized: 16 RAM disks of 4096K size
> PCI_IDE: unknown IDE controller on PCI bus 00 device 40, VID=1095,
> DID=0643
> PCI_IDE: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xfe00-0xfe07, BIOS settings: hda:pio, hdb:pio
> ide1: BM-DMA at 0xfe08-0xfe0f, BIOS settings: hdc:pio, hdd:pio
> hda: IBM-DPRA-21215, ATA DISK drive
> ide2: ports already in use, skipping probe
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: IBM-DPRA-21215, 1160MB w/64kB Cache, CHS=589/64/63
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a National Semiconductor PC87306
> md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
> raid5: measuring checksumming speed
> 8regs : 140.208 MB/sec
> 32regs : 123.444 MB/sec
> using fastest function: 8regs (140.208 MB/sec)
> scsi : 0 hosts.
> scsi : detected total.
> md.c: sizeof(mdp_super_t) = 4096
> Partition check:
> hda: hda1 hda2 < hda5 hda6 >
> autodetecting RAID arrays
> autorun ...
> ... autorun DONE.
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 60k freed
> Adding Swap: 50364k swap-space (priority -1)
> Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
> SB 3.01 detected OK (220)
> YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft
> 1993-1996
> Linux PCMCIA Card Services 3.0.9
> kernel build: 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999
> options: [pci] [cardbus] [apm]
> Intel PCIC probe:
> Vadem VG-469 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
> host opts [0]: none
> host opts [1]: none
> ISA irqs (scanned) = 3,4,7,9,10,11,15 status change on irq 15
> cs: IO port probe 0x1000-0x17ff: excluding 0x1200-0x1207 0x1220-0x122f
> 0x1330-0x1337 0x1388-0x138f
> cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x378-0x37f
> cs: IO port probe 0x0a00-0x0aff: clean.
> Installing knfsd (copyright (C) 1996 "okir@monad.swb.de
<mailto:okir@monad.swb.de?Subject=Re:%20[PARPORT]%20RE:%20PLEASE%20HELP%20ME
%20...&In-Reply-To=<5526BD8656D5D211A72B0090274603502CB7B1@CARBO-MAIL>).
> nfsd_init: initialized fhcache, entries=256
> paride: version 1.04 installed
> paride: k951 registered as protocol 0
> paride: k971 registered as protocol 1
> pcd: pcd version 1.07, major 46, nice 0
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport0: no IEEE-1284 device present.
> pcd0: Sharing parport0 at 0x378
> pcd0: kbic 1.01, KingByte KBIC-951A at 0x378, mode 2 (8-bit), delay 1
> pcd0: Slave: CD-ROM CR-581
> Uniform CDROM driver Revision: 2.54
> VFS: Disk change detected on device pcd(46,0)
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> end_request: I/O error, dev 2e:00 (PCD), sector 2
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> end_request: I/O error, dev 2e:00 (PCD), sector 2
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3
> end_request: I/O error, dev 2e:00 (PCD), sector 0
> FAT bread failed
>
>
>
> THANK YOU VERY MUCH FOR YOUR HELP,
>
> Sylvain BRUNET
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Fri Mar 24 2000 - 05:05:48 EST