Okay I am back.. compiled and installed v.1.8.1 still giving me fits.
Here is what I have... question is, Is there a diagnostic utility that I
can run under linux to test the unit. How do I know if the cdrw unit is
good ? I mean I can blank a cd, but I can't record. Is there a big
difference in what it does during blank vs writing ?
cdrecord -v speed=2 dev=0,0 04262000-1.iso
Cdrecord 1.8.1 (i586-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7100 '
Revision : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 66 MB
Total size: 76 MB (07:35.36) = 34152 sectors
Lout start: 76 MB (07:37/27) = 34152 sectors
Current Secsize: 2048
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
ATIP start of lead in: -11079 (97:34/21)
ATIP start of lead out: 336075 (74:43/00)
Disk type: phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 301923
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 3 of 66 MB written (fifo 43%).cdrecord: Input/output error.
write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 07 60 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 00 00 19 00 00 0A DF 0C 09 00 00 FF FF
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 0 (valid)
write track data: error after 3866624 bytes
Sense Bytes: F0 00 00 00 00 00 00 19 00 00 0A F0 00 00 00 00 FF FF
Writing time: 28.046s
Fixating...
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Apr 27 2000 - 23:37:09 EDT