[PARPORT] CD writer HP 7500e Plus problems again... Please, help quickly

From: rnd@onego.ru
Date: Sat Jun 03 2000 - 05:53:35 EDT

  • Next message: rnd@onego.ru: "Re: [PARPORT] ( solved ) CD writer HP 7500e Plus problems again... Please, help quickly"

    Hello!

    I read all the article about HP ( Hewlett Packard ) 7500e Plus
    CD writer but still can't make use of the device under Linux!

    I have installed 2.2.14 Linux kernel (tryed 2.2.5, 2.2.11)
    Tryed cdrecord-1.8a24, cdrecord 1.8, 1.8.1 - to no result!

    (Yes, insmod paride, epat, pg , pcd works fine)

    the problem is the old one:

    # cdrecord -dummy -v -dev=0,0,0 -nofix -data /c/cdr7.iso

    ...
    Starting new track at sector: -1
    Track 02: 0 of 615 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
    CDB: 2A 00 FF FF FF FF 00 00 10 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
    Sense flags: Blk 0 (not valid)
    ...

    -- same error in all my tries.

    ( driver=cdr_simul works fine)

    The parallel port is in EPP mode (tried in EPP/ECP).

    What else?
    I did every other verbose's but found nothing special:
    cdrecord: fifo had 128 puts and 1 gets.
    ( 0 bytes transferred )

    Any ideas?

    *

    Please help, as I have limited time to promote Linux in CD
    burning and this failure will spoil the impression of my boss...

    Sincerely yours, Roman Suzi

    -- 
    ~ Russia ~ Karelia ~ Petrozavodsk ~ rnd@onego.ru ~
    ~ Saturday, June 03, 2000 ~ Powered by Linux RedHat 6.0 ~
    

    -- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --



    This archive was generated by hypermail 2b29 : Sat Jun 03 2000 - 05:57:34 EDT