Re: [PARPORT] Failure to negotiate an ecp mode

From: Tim Waugh (twaugh@redhat.com)
Date: Tue Nov 14 2000 - 13:20:52 EST

  • Next message: James T. Nelson III: "Re: [PARPORT] SSQ2030 scanner and onscsi module"

    On Tue, Nov 14, 2000 at 04:33:15PM +0100, John O'Connor wrote:

    > I changed mux_present to return zero and not to do the cpp command
    > for the mux request but there was no difference apart from the lack
    > of a mux command on the port. Still timed out.

    When you do the negotiation are you using the PP_NEGOT ioctl, or doing
    it by hand?

    Tim.
    */


    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Tue Nov 14 2000 - 13:22:33 EST