[PARPORT] Transdisk failure

From: Scapester (scapester2000@hotmail.com)
Date: Fri Jan 26 2001 - 23:23:53 EST

  • Next message: Marcel Pol: "RE: [PARPORT] Win modem"

    I am hoping someone can help with a problem I am having. When I try to insmod the pf driver I get this error message:

         insmod pf
        Using /lib/modules/2.2.14-3/misc/pf.o
        /lib/modules/2.2.14-3/misc/pf.o: init_module: Device or resource busy

    I have unloaded and reloaded the parport, paride and fit3 modules. I get this message when I try to insert any drivers, pf, pcd, etc. I am running turbolinux 6.0 server lite. My lsmod shows :

        Module Size Used by
        parport_probe 3164 0 (autoclean)
        parport_pc 7232 0 (autoclean)
        soundcore 2336 0 (autoclean) (unused)
        fit3 3876 0
        msdos 5300 0 (autoclean) (unused)
        paride 3408 1 [fit3]
        parport 6724 0 [parport_probe parport_pc paride]
        nfs 27012 2 (autoclean)
        nfsd 141328 1 (autoclean)
        lockd 29260 1 (autoclean) [nfs nfsd]
        sunrpc 48492 1 (autoclean) [nfs nfsd lockd]
        tulip 32552 1 (autoclean)
        pci-scan 2640 0 (autoclean) [tulip]
        vfat 9188 0 (unused)
        fat 29220 0 [msdos vfat]

    Dmesg show:

        paride: version 1.04 installed

        paride: fit3 registered as protocol 0

        parport0: PC-style at 0x378 [SPP,PS2,EPP]
        parport0: no IEEE-1284 device present.
        pf0: Autoprobe failed
        pf: No ATAPI disk detected

    I have tried: insmod pf drive0=0x378,0 - insmod pf drive1=0x378,0, and all combination of drive, protocol numbers etc. Any help would be greatly apperciated. Thanks,

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Fri Jan 26 2001 - 23:29:06 EST