Re: [PARPORT] Redhat 7.1 & HP 5300C scanner

From: Tim Waugh (twaugh@redhat.com)
Date: Fri Jun 29 2001 - 16:34:03 EDT

Next message: David Lambert: "[PARPORT] How do I send an ECP command from a user level driver?"

Previous message: Fernando Pando: "[PARPORT] Redhat 7.1 & HP 5300C scanner"
In reply to: Fernando Pando: "[PARPORT] Redhat 7.1 & HP 5300C scanner"
Next in thread: Fernando Pando: "RE: [PARPORT] Redhat 7.1 & HP 5300C scanner"
Reply: Fernando Pando: "RE: [PARPORT] Redhat 7.1 & HP 5300C scanner"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Jun 29, 2001 at 03:03:19PM +0100, Fernando Pando wrote:

> 1) why is "make modules" breaking? any clues?

Use 'make mrproper' first, then copy a config file (from the configs
directory) to .config, and run make oldconfig.

> 2) am I on the right path? do i need to recompile the kernel?
> 3) the HP5300C is connected to the parallel port. am on on the right track
> with the ppscsi patch?

Yes.

Tim.
*/

application/pgp-signature attachment: stored

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --

Next message: David Lambert: "[PARPORT] How do I send an ECP command from a user level driver?"
Previous message: Fernando Pando: "[PARPORT] Redhat 7.1 & HP 5300C scanner"
In reply to: Fernando Pando: "[PARPORT] Redhat 7.1 & HP 5300C scanner"
Next in thread: Fernando Pando: "RE: [PARPORT] Redhat 7.1 & HP 5300C scanner"
Reply: Fernando Pando: "RE: [PARPORT] Redhat 7.1 & HP 5300C scanner"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri Jun 29 2001 - 16:35:33 EDT