hi,
i got an Agfa SnapScan 310P, it works find with win95 and the eppscsi miniport
driver, so i thought it must be possible to get it to work under linux either.
so i found the sane homepage, and found out that the scsi version is supported
but parallel version is not.
next i found the eppscsi homepage
i compiled a new kernel (2.4.8) with the ppscsi patch, etc... but i think
i need a special driver for the snapscan don't i?
i got the modules loaded, including ppscsi.o, but i'm not sure what
"protocol module" i need.
t348: a protocol module for the APA-348 and T348
t358: a protocol module for the APA-358 and T358
epsa2: a protocol module for the (old) Shuttle EPSA-2
epst: a protocol module for the Shuttle EPST and APA-1350
onscsi: a protocol module for the OnSpec 90c26
sparcsi: a protocol module for the SparCSI and ParaSCSI
i tried epst, but (of course) it didn't work, its just for HP scanners i think
i found the following in my syslog:
first the parport is detected (i put it in EPP mode and ECP mode and EXTENDED
in the BIOS, nothing works.)
parport0: PC-style at 0x378 [PCSPP(,...)]
then when trying to load epst:
Aug 16 15:21:03 phat kernel: epst.0: 0x378 is parport0
Aug 16 15:21:03 phat kernel: epst.0: version code reads: 0x88
Aug 16 15:21:03 phat kernel: epst.0: port 0x378 mode 0 test failed (1,-1,0)
Aug 16 15:21:03 phat kernel: epst.0: version code reads: 0x50
Aug 16 15:21:03 phat kernel: epst.0: port 0x378 mode 1 test failed (1,-1,0)
Aug 16 15:21:03 phat kernel: epst.0: version code reads: 0xff
Aug 16 15:21:03 phat kernel: epst.0: port 0x378 mode 2 test failed (1,-1,0)
so any ideas?
do i just need a protocol module for the snapscan?
TIA,
ciao,
schrat
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Aug 16 2001 - 08:38:57 EDT