On Wed, Oct 10, 2001 at 09:57:33PM +0200, Norbert Preining wrote:
> No for the parallel port: I load parport_pc with
> modprobe parport_pc irq=7,none dma=3,none io=0x0378,0xc400
> which works, recognizes my printer on the second printer port (lp0 on
> But: If I load NOW the emu10k1 the system freezes.
> Same with emu10k1 loaded and modprobe parport_pc.
It will be because you haven't supplied the io_hi parameter; to tell
it _not_ to probe for an ECR register at base+0x400, you need to
There is a patch for some NetMos cards, but unfortunately it seems to
suffer from the same problem anyway, which suggests that the code is
buggy in some way. :-(
-- To unsubscribe, send mail to: email@example.com --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Oct 11 2001 - 06:40:25 EDT