i have major problems to get my digital joystick working with parport. here are the relevant snips from dmesg
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
Detected PS/2 Mouse Port.
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
db9.c: specified parport is not bidirectional
block: 128 slots per queue, batch=32
i have tried every possible setting in the bios, but db9 allways complains about non bidirectional parport :-(
also, i don't understand way lp0 uses polling, when parport detected the irq.
can anybody help me?
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sun Jan 20 2002 - 07:03:15 EST