On Tue, Apr 02, 2002 at 09:06:05PM +0200, Luc Pardon wrote:
> * the cable is OK, it does deliver pin 10 into the PC's serial port
Serial port? ;-)
You have to set the IntEn bit in the parallel port control register.
It's 0x10 I think (1 for enable).
-- To unsubscribe, send mail to: email@example.com --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Apr 04 2002 - 10:11:41 EST