Re: [PARPORT] Beginner needs help with EPP...

From: Sven Heithecker (sven.heithecker@web.de)
Date: Tue Apr 22 2003 - 10:33:35 EDT

  • Next message: Gunther Mayer: "Re: [PARPORT] Support for SMSC 37N869?"

    Am Dienstag, 22. April 2003 06:17 schrieb Bob Tanner:
    > On Monday 21 April 2003 04:47 pm, Sven Heithecker wrote:
    > > > Try turning on debugging in the parport module?
    > > >
    > > > I'm not sure if this is the proper way, but I edited:
    > > > ieee1284_ops.c
    > > > ieee1284.c
    > > > parport_pc.c
    > > > And changed the #undef DEBUG to #define DEBUG
    >
    > <snip>
    >
    > > Hi,
    > > thank you for that, I changed the options in modules.conf (already got
    > > that idea by myself ;-) ) and now It says indeed in
    > > /proc/sys/dev/parport0/modes that EPP is available, but the program still
    > > fails at EPP negotiation.
    >
    > Did you try #define DEBUG in the files I mentioned above?

    Not yet, but ...

    > Do you really have an EPP device on slave (other side of the parallel
    > port)?
    > I found if you don't have a device on the other side, EPP negotation will
    > fail.

    That's the point. I havent got the device yet, testing will start soon...
    Thank you very much for this info !

    Kind Regards, 

    -- 
Sven Heithecker     sven.heithecker@web.de
Pestalozzistr 6     Fax 0531-3489815
38114 Braunschweig  Tel 0531-336580

    --  To unsubscribe, send mail to: linux-parport-request@torque.net --
--  with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Tue Apr 22 2003 - 11:14:19 EDT