[PARPORT] pg error on loading

From: Siva M (callmd@cogeco.ca)
Date: Tue Dec 02 2003 - 20:01:41 EST

  • Next message: James: "[PARPORT] as"

    Following is the output I get when I try to load the PG driver ....
    My kernel is "2.4.22-10mdksmp #1 SMP"

    Till about kernel "2.4.21-xxxsmp #1 SMP" I did not have this
    problem.... Now that I have upgraded my system to Mandrake 9.2... with
    this kernel I am having trouble... Any suggestions or pointers as to
    where I should look....

    I use a external / parallel port Backpack CD R/W
    =========== Console Output =============================================
     [root@aditya root]# insmod paride
     [root@aditya root]# insmod bpck6
     [root@aditya root]# insmod pg
     Using /lib/modules/2.4.22-10mdksmp/kernel/drivers/block/paride/pg.o.gz
     init_module: Operation not permitted
     Hint: insmod errors can be caused by incorrect module parameters,
     including invalid IO or IRQ parameters.
           You may find more information in syslog or the output from dmesg
     ========== OUTPUT of DMESG
     parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
     parport0: Printer, HEWLETT-PACKARD DESKJET 810C
     parport_pc: Via 686A parallel port: io=0x378
     lp0: using parport0 (polling).
     paride: version 1.06 installed (parport)
     bpck6: BACKPACK Protocol Driver V2.0.2ac
     bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA
     paride: bpck6 registered as protocol 0
     pg: pg version 1.02, major 97
     pg0: Autoprobe failed
     pg: No ATAPI device detected

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Tue Dec 02 2003 - 20:07:50 EST