Linux version 2.4.2-2 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-79)) #1 Sun Apr 8 20:41:30 EDT 2001 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000007ed0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000f000 @ 0000000007fd0000 (ACPI data) BIOS-e820: 0000000000001000 @ 0000000007fdf000 (ACPI NVS) BIOS-e820: 0000000000020000 @ 0000000007fe0000 (reserved) BIOS-e820: 0000000000020000 @ 00000000fffe0000 (reserved) On node 0 totalpages: 32720 zone(0): 4096 pages. zone DMA has max 32 cached pages. zone(1): 28624 pages. zone Normal has max 223 cached pages. zone(2): 0 pages. zone HighMem has max 1 cached pages. Kernel command line: auto BOOT_IMAGE=linux ro root=302 BOOT_FILE=/boot/vmlinuz-2.4.2-2 Initializing CPU#0 Detected 298.429 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 594.73 BogoMIPS Memory: 126284k/130880k available (1365k kernel code, 4208k reserved, 92k data, 236k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.5.0 initialized CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Pentium II (Deschutes) stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=6 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 PCI: Found IRQ 11 for device 00:02.0 PCI: The same IRQ used for device 00:03.0 PCI: Found IRQ 11 for device 00:02.1 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Starting kswapd v1.8 pty: 256 Unix98 ptys configured block: queued sectors max/low 83784kB/27928kB, 256 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DADA-25120, ATA DISK drive hdc: SANYO CRD-S372B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 10009440 sectors (5125 MB) w/460KiB Cache, CHS=662/240/63, UDMA(33) Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10d md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md.c: sizeof(mdp_super_t) = 4096 autodetecting RAID arrays autorun ... ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 236k freed Adding Swap: 264592k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.251 $ time 20:53:29 Apr 8 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 usb-uhci.c: USB UHCI at I/O 0x8400, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. ip_conntrack (1022 buckets, 8176 max) Linux PCMCIA Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 11 for device 00:02.0 PCI: The same IRQ used for device 00:03.0 PCI: Found IRQ 11 for device 00:02.1 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices. SCSI subsystem driver Revision: 1.00 Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... SMSC Super-IO detection, now testing Ports 2F0, 370 ... imm: Version 2.05 (for Linux 2.4.0) imm: parport reports no devices.