Linux version 2.4.20 (root@thorn) (gcc version 2.95.4 20011002 (Debian prerelease)) #15 Mon Dec 23 23:23:55 MST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017ffd000 (usable) BIOS-e820: 0000000017ffd000 - 0000000017fff000 (ACPI data) BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98301 zone(0): 4096 pages. zone(1): 94205 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux ro root=346 hdc=scsi ide_setup: hdc=scsi Initializing CPU#0 Detected 451.033 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 897.84 BogoMIPS Memory: 386300k/393204k available (1390k kernel code, 6520k reserved, 581k data, 88k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Katmai) stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:04.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x378 [PCSPP(,...)] pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MPF3204AT, ATA DISK drive hdb: WDC AC313000R, ATA DISK drive hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c032d724, I/O limit 4095Mb (mask 0xffffffff) hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=2491/255/63, UDMA(33) blk: queue c032d870, I/O limit 4095Mb (mask 0xffffffff) hdb: 25429824 sectors (13020 MB) w/512KiB Cache, CHS=1582/255/63, UDMA(33) ide-cd: passing drive hdc to ide-scsi emulation. Partition check: hda: hda1 hda2 < hda5 > hdb: hdb1 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al. arcnet: Available protocols: RFC1051 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 11 for device 00:0c.0 eth0: RealTek RTL8139 Fast Ethernet at 0xd8800000, 00:20:18:a0:10:82, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139B' SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 8x/8x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Creative EMU10K1 PCI Audio Driver, version 0.20, 23:26:08 Dec 23 2002 PCI: Found IRQ 10 for device 00:0d.0 PCI: Sharing IRQ 10 with 00:04.2 emu10k1: EMU10K1 rev 5 model 0x20 found, IO at 0xb800-0xb81f, IRQ 10 ac97_codec: AC97 codec, id: TRA35(TriTech TR A5) usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 23:26:25 Dec 23 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:04.2 PCI: Sharing IRQ 10 with 00:0d.0 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 88k freed hub.c: new USB device 00:04.2-2, assigned address 2 input0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:2.0 Adding Swap: 497944k swap-space (priority -1) eth0: Setting half-duplex based on auto-negotiated partner ability 0000. paride: version 1.06 installed (parport) paride: epat registered as protocol 0 pg: pg version 1.02, major 97 pg0: 0x378 is parport0 pg0: epat: port 0x378, mode 0, ccr 77, test=(255,255,510) pg0: epat: port 0x378, mode 1, ccr 4f, test=(255,255,510) pg0: epat: port 0x378, mode 2, ccr ff, test=(255,255,510) pg0: epat: port 0x378, mode 3, ccr ff, test=(255,255,510) pg0: epat: port 0x378, mode 4, ccr ff, test=(255,255,510) pg0: epat: port 0x378, mode 5, ccr ff, test=(255,255,510) pg0: Autoprobe failed pg: No ATAPI device detected paride: aten registered as protocol 1 paride: bpck registered as protocol 2 bpck6: BACKPACK Protocol Driver V2.0.2ac bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA paride: bpck6 registered as protocol 3 paride: comm registered as protocol 4 paride: dstr registered as protocol 5 paride: fit2 registered as protocol 6 paride: fit3 registered as protocol 7 paride: epia registered as protocol 8 paride: friq registered as protocol 9 paride: frpw registered as protocol 10 paride: k951 registered as protocol 11 paride: k971 registered as protocol 12 paride: ktti registered as protocol 13 paride: on20 registered as protocol 14 paride: on26 registered as protocol 15 pg: pg version 1.02, major 97 pg0: 0x378 is parport0 pg0: epat: port 0x378, mode 0, ccr 77, test=(255,255,510) pg0: epat: port 0x378, mode 1, ccr 4f, test=(255,255,510) pg0: epat: port 0x378, mode 2, ccr ff, test=(255,255,510) pg0: epat: port 0x378, mode 3, ccr ff, test=(255,255,510) pg0: epat: port 0x378, mode 4, ccr ff, test=(255,255,510) pg0: epat: port 0x378, mode 5, ccr ff, test=(255,255,510) pg0: 0x378 is parport0 pg0: aten: port 0x378, mode 0, test=(255,255) pg0: aten: port 0x378, mode 1, test=(255,255) pg0: 0x378 is parport0 pg0: 0x378 is parport0 pg0: 0x378 is parport0 pg0: comm: port 0x378, mode 0, test=(255,255) pg0: comm: port 0x378, mode 1, test=(255,255) pg0: comm: port 0x378, mode 2, test=(255,255) pg0: comm: port 0x378, mode 3, test=(255,255) pg0: comm: port 0x378, mode 4, test=(255,255) pg0: 0x378 is parport0 pg0: dstr: port 0x378, mode 0, test=(255,255) pg0: dstr: port 0x378, mode 1, test=(255,255) pg0: dstr: port 0x378, mode 2, test=(255,255) pg0: dstr: port 0x378, mode 3, test=(255,255) pg0: dstr: port 0x378, mode 4, test=(255,255) pg0: 0x378 is parport0 pg0: fit2: port 0x378, mode 0, test=(255,255) pg0: 0x378 is parport0 pg0: fit3: port 0x378, mode 0, test=(255,255) pg0: fit3: port 0x378, mode 1, test=(255,255) pg0: fit3: port 0x378, mode 2, test=(255,255) pg0: 0x378 is parport0 pg0: epia: port 0x378, mode 0, test=(255,255,510) pg0: epia: port 0x378, mode 1, test=(255,255,510) pg0: epia: port 0x378, mode 2, test=(255,255,510) pg0: epia: port 0x378, mode 3, test=(255,255,510) pg0: epia: port 0x378, mode 4, test=(255,255,510) pg0: epia: port 0x378, mode 5, test=(255,255,510) pg0: 0x378 is parport0 pg0: friq: port 0x378, mode 0, test=(255,255,127) pg0: friq: port 0x378, mode 1, test=(255,255,128) pg0: friq: port 0x378, mode 2, test=(255,255,128) pg0: friq: port 0x378, mode 3, test=(255,255,128) pg0: friq: port 0x378, mode 4, test=(255,255,128) pg0: 0x378 is parport0 pg0: frpw: port 0x378, chip 0, mode 0, test=(255,255,127) pg0: frpw: port 0x378, chip 0, mode 1, test=(255,255,128) pg0: frpw: port 0x378, chip 0, mode 2, test=(255,255,128) pg0: frpw: Xilinx does not support mode 3 pg0: frpw: Xilinx does not support mode 4 pg0: frpw: Xilinx does not support mode 5 pg0: 0x378 is parport0 pg0: k951: port 0x378, mode 0, test=(255,255) pg0: k951: port 0x378, mode 1, test=(255,255) pg0: k951: port 0x378, mode 2, test=(255,255) pg0: k951: port 0x378, mode 3, test=(255,255) pg0: k951: port 0x378, mode 4, test=(255,255) pg0: k951: port 0x378, mode 5, test=(255,255) pg0: 0x378 is parport0 pg0: k971: port 0x378, mode 0, test=(255,255) pg0: k971: port 0x378, mode 1, test=(255,255) pg0: k971: port 0x378, mode 2, test=(255,255) pg0: k971: port 0x378, mode 3, test=(255,255) pg0: k971: port 0x378, mode 4, test=(255,255) pg0: k971: port 0x378, mode 5, test=(255,255) pg0: 0x378 is parport0 pg0: ktti: port 0x378, mode 0, test=(255,255) pg0: 0x378 is parport0 pg0: on20: port 0x378, mode 0, test=(255,255) pg0: on20: port 0x378, mode 1, test=(255,255) pg0: 0x378 is parport0 pg0: on26: port 0x378, mode 0, test=(255,255) pg0: on26: port 0x378, mode 1, test=(255,255) pg0: on26: port 0x378, mode 2, test=(255,255) pg0: on26: port 0x378, mode 3, test=(255,255) pg0: on26: port 0x378, mode 4, test=(255,255) pg0: Autoprobe failed pg: No ATAPI device detected