Bob Matthews (bob@cs.wm.edu)
Tue, 21 Apr 1998 10:05:39 -0400 (EDT)
I'm trying to get a Western Digital Caviar attached to the parallel port
using the ValueStor external hard drive. I'm running 2.1.87 and version
2.1.85 of the module tools. From visual inspection, it looks like the
ValueStor has the OnSpec 26 chip. (It's labeled OnSpec 90C26-E.) Here
are the kernel messages I receive when I load the modules:
# insmod paride
paride: version 1.0 installed
# insmod on26
paride: on26 registered as protocol 0
# insmod pd -verbose=1
pd: pd version 1.01, major 45, cluster 64, nice 0
pda: on26: port 0x3bc, mode 0, test=(255,255)
pda: on26: port 0x3bc, mode 1, test=(255,255)
pda: 0x378 is parport0
pda: on26: port 0x378, mode 0, test=(255,255)
pda: on26: port 0x378, mode 1, test=(255,255)
pda: on26: port 0x378, mode 2, test=(255,255)
pda: on26: port 0x378, mode 3, test=(255,255)
pda: on26: port 0x378, mode 4, test=(255,255)
pda: on26: port 0x278, mode 0, test=(255,255)
pda: on26: port 0x278, mode 1, test=(255,255)
pda: on26: port 0x278, mode 2, test=(255,255)
pda: on26: port 0x278, mode 3, test=(255,255)
pda: on26: port 0x278, mode 4, test=(255,255)
pda: on26: port 0x268, mode 0, test=(255,255)
pda: on26: port 0x268, mode 1, test=(255,255)
pda: on26: port 0x268, mode 2, test=(255,255)
pda: on26: port 0x268, mode 3, test=(255,255)
pda: on26: port 0x268, mode 4, test=(255,255)
pda: on26: port 0x27c, mode 0, test=(255,255)
pda: on26: port 0x27c, mode 1, test=(255,255)
pda: on26: port 0x26c, mode 0, test=(255,255)
pda: on26: port 0x26c, mode 1, test=(255,255)
pda: Autoprobe failed
pd: no valid drive found
Thanks,
Bob Matthews
bob@cs.wm.edu
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:17:39 EST