peloy@ven.ra.rockwell.com
5 Aug 1998 01:08:50 GMT
grant@torque.net wrote:
>> >> pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 0 (4-bit), delay 1
>
> Fix your parallel port. You will not be able to burn a CD-R from anywhere,
> let alone NFS, in mode 0. Your port should be set to "EPP" mode. Do not
> use ECP mode.
I agree with Grant. Your problem is the parallel port mode you're
using. You need at least mode 2 (8-bit) for writing at 1x. I have
burnt CD's reading the ISO9660 image from a NFS mounted directory at
speed 1x and during busy network time with no problems at all.
See ya!
peloy.-
--Eloy A. Paris Information Technology Department Rockwell Automation Venezuela Telephone: +58-2-9432311 Fax: +58-2-9431645
-- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:06 EST