Laurent GIRAUD (lgiraud@mema.ucl.ac.be)
Thu, 27 Aug 1998 13:29:05 +0200
Hi,
I got a HP7100+ on parallel port. I usr the pg driver with epat
protocol, scsi emulation, at boot time, I got this:
hdc: HITACHI CDR-8130, ATAPI CDROM drive - enabling SCSI emulation
ATAPI overlap supported: No
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive - enabling SCSI emulation
ATAPI overlap supported: No
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
paride: epat registered as protocol 0
pg: pg version 1.01s, major 97
pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1
pg0: HP CD-Writer+ 7100, slave
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: HITACHI Model: CDR-8130 Rev: 0021
Type: CD-ROM ANSI SCSI revision: 02
Vendor: IOMEGA Model: ZIP 100 Rev: 23.D
Type: Direct-Access ANSI SCSI revision: 00
scsi : detected total.
When I try cdrecord -scanbus, I got:
>cdrecord -scanbus
Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling
scsibus0:
0) 'HP ' 'CD-Writer+ 7100 ' '1.00' Removable
CD-ROM
As it is recognize as a Removable CD-ROM, I can't write on it !
An other test:
>cdrecord -checkdrive dev=1,0,0
Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7100 '
Revision : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
-------------------------------
If I try to write something, I get:
>cdrecord -v -speed=2 dev=0,0,0 binary-i386.raw
Cdrecord release 1.6 Copyright (C) 1995-1998 Jörg Schilling
TOC Type: 1 = CD-ROM
cdrecord: Function not implemented. shmget failed
-------------------------------
>cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyp
5 cua
7 vcs
10 misc
21 sg
97 pg
Block devices:
2 fd
3 ide0
7 loop
22 ide1
---------------------------------------
>cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037f : pg0
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(set)
ff00-ff1f : 3c905 Boomerang 100baseTx
ffa0-ffa7 : IDE DMA
ffa8-ffaf : IDE DMA
Any Idea ??????? What's wrong ?
--
Laurent GIRAUD
Centre for Systems Engineering and Applied Mechanics (CESAME)
Universite catholique de Louvain
Batiment Euler -- Av. Georges Lemaitre, 4
B-1348 Louvain-la-Neuve -- Belgium
Tel : +32-10-47 8055
Fax : +32-10-47 2180
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:08 EST