David Campbell (campbell@torque.net)
Thu, 15 Oct 1998 07:12:56 +0800
From: rfunk@wks.uts.ohio-state.edu (Rob Funk)
Subject: [PARPORT] Linksys ParaSCSI Plus support?
To: linux-parport@torque.net
Date sent: Wed, 14 Oct 1998 17:35:42 -0400 (EDT)
> Is there a driver floating around that works with the Linksys ParaSCSI
> Plus adapter? The chip inside is an NCR 53C80E.
According to the details I can find the NCR 53C80 was used in some Macs.
I know that Grant has two drivers for the Adaptec Trantor interfaces.
http://www.torque.net/parport/parscsi.html
If you can lay your hands on some technical info regarding how the NCR chip
is tied to the parallel port, this would be a big help. Perhaps the ParaSCSI is
really a Trantor in disguise.
David Campbell
=======================================================
campbell@torque.net
Current project list:
a) Maintain Linux ZIP drivers
b) Create Linux chipset specific parport drivers
c) Start on ParSCSI drivers
Any assistance to clearing this list most welcome
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:35 EST