[PARPORT] Microtek V600 (OnSpec) support?


Stefan Mashkevich (mash@mashke.org)
Mon, 2 Nov 1998 13:22:49 -0600 (CST)


Hello,

a message in the sane-devel mailing list,
<http://www.mostang.com/mail-archive/sane-devel/1998-02/0101.html>,
mentions that
"the Microtek scanners (the V300, V310, E3Plus, V600) use
OnSpec's SCSI controller chip",

and the Linux and parallel port SCSI adapters page,
<http://www.torque.net/parport/parscsi.html>,
on 31 January 1998, says that
"the 90c26 chip from OnSpec Electronics, which the PARIDE suite supports
as a parallel port IDE adapter, also includes an integral SCSI host
adapter. A driver for this device is being worked on, but is not yet
available."

Question: Can I get my Microtek V600 supported under Linux at this time?

Thanks a lot,
                                                   Stefan

--------------------------------
mash@mashke.org
http://www.mashke.org/home/

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --



This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:43 EST