Re: [PARPORT] Problems w/ pd + EZ flyer.


Niklas Andersson (nian2981@student.uu.se)
Fri, 1 Jan 1999 19:56:04 +0100 (CET)


So, I've finally got it to work ;)

/# insmod pd drive0=0x378,0,0,2,0,1,0 verbose=1

pd: pd version 1.04s, major 45, cluster 64, nice 0
pda: epat: port 0x378, mode 2, ccr 80, test=(0,0,0)
pda: epat 1.01, Shuttle EPAT chip c3 at 0x378, mode 2 (8-bit), delay 0
pda: SyQuest EZ230A, master, 450560 blocks [220M], (880/16/32), removable
media
 pda: pda1

> > ~# insmod pd drive0=0x378,0,0,2,0,1,-1 verbose=1
> >
> > pda: epat: port 0x2019c84, mode 2, ccr ff, test=(255,255,510)
> ^^^^^^^^^
> hunh ? Is that repeatable ??? If so, there's some kind of bug there !

It actually is repeatable, and it seems to appear whenever I try to
initialise the driver into any of the three first modes (0,1,2) and at the
same time setting the delay parameter to -1. The driver is functional in
mode 0 and 2.

Anyway, it's working now and hopefully this information will be of use to
you.

Thanks for your time.

/Niklas

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --



This archive was generated by hypermail 2.0b3 on Fri 01 Jan 1999 - 13:59:02 EST