Andrzej Wadas (info@wamm.com.pl)
Wed, 03 Mar 1999 19:07:09 +0000

My linux box runs 20.36 kernel.
At the boot time it recognizes HP COLORADO 5Gb drive saying
pt0:epat 1.01, Shuttle EPAT chip c6 at 0x378 mode 5 (EPP-32), delay 1
and tape is spinning to give
pt0: HP COLORADO 5GBe, master, blocksize 512, 2458 MB.
According to archives I should see it working as I run
tar -cvf /dev/pt0 /home.
However, I see tar working and writing a file /dev/pt0, HP does not move
at all.
Do I miss something?

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --

This archive was generated by hypermail 2.0b3 on Wed 03 Mar 1999 - 12:08:41 EST