[PARPORT] More info about Sony Superstation and PARIDE

Peter Eacmen (eacmen@att.net)
Sat, 03 Apr 1999 22:59:50 -0500

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: grant@torque.net: "Re: [PARPORT] More info about Sony Superstation and PARIDE"
• Previous message: grant@torque.net: "Re: [PARPORT] Using the PARIDE driver with a Sony Superstation"
• Next in thread: grant@torque.net: "Re: [PARPORT] More info about Sony Superstation and PARIDE"

Here is the kernel dump when I run insmod pt verbose=1:

[[root@server /dev]# insmod pt verbose=1
pt: pt version 1.04, major 96
pt0: epat: port 0x3bc, mode 0, ccr ff, test=(255,255,510)
pt0: epat: port 0x3bc, mode 1, ccr ff, test=(255,255,510)
pt0: epat: port 0x3bc, mode 2, ccr ff, test=(255,255,510)
pt0: epat: port 0x378, mode 0, ccr 0, test=(196,190,0)
pt0: epat: port 0x378, mode 1, ccr 0, test=(192,199,0)
pt0: epat: port 0x378, mode 2, ccr 2d, test=(255,255,510)
pt0: epat: port 0x378, mode 3, ccr 10, test=(256,256,510)
pt0: epat: port 0x378, mode 4, ccr 10, test=(256,256,510)
pt0: epat: port 0x378, mode 5, ccr 10, test=(256,256,511)
pt0: epat: port 0x278, mode 0, ccr ff, test=(255,255,510)
pt0: epat: port 0x278, mode 1, ccr ff, test=(255,255,510)
pt0: epat: port 0x278, mode 2, ccr ff, test=(255,255,510)
pt0: epat: port 0x278, mode 3, ccr ff, test=(255,255,510)
pt0: epat: port 0x278, mode 4, ccr ff, test=(255,255,510)
pt0: epat: port 0x278, mode 5, ccr ff, test=(255,255,510)
pt0: epat: port 0x268, mode 0, ccr ff, test=(255,255,510)
pt0: epat: port 0x268, mode 1, ccr ff, test=(255,255,510)
pt0: epat: port 0x268, mode 2, ccr ff, test=(255,255,510)
pt0: epat: port 0x268, mode 3, ccr ff, test=(255,255,510)
pt0: epat: port 0x268, mode 4, ccr ff, test=(255,255,510)
pt0: epat: port 0x268, mode 5, ccr ff, test=(255,255,510)
pt0: epat: port 0x27c, mode 0, ccr ff, test=(255,255,510)
pt0: epat: port 0x27c, mode 1, ccr ff, test=(255,255,510)
pt0: epat: port 0x27c, mode 2, ccr ff, test=(255,255,510)
pt0: epat: port 0x26c, mode 0, ccr ff, test=(255,255,510)
pt0: epat: port 0x26c, mode 1, ccr ff, test=(255,255,510)
pt0: epat: port 0x26c, mode 2, ccr ff, test=(255,255,510)
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
/lib/modules/2.2.1/misc/pt.o: init_module: Device or resource busy

Thanks any help would be appreciated

-Peter

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --

• Next message: grant@torque.net: "Re: [PARPORT] More info about Sony Superstation and PARIDE"
• Previous message: grant@torque.net: "Re: [PARPORT] Using the PARIDE driver with a Sony Superstation"
• Next in thread: grant@torque.net: "Re: [PARPORT] More info about Sony Superstation and PARIDE"

This archive was generated by hypermail 2.0b3 on Sat 03 Apr 1999 - 23:19:21 EST