grant@torque.net
Sun, 4 Apr 1999 08:56:07 -0400 (EDT)
> Here is the kernel dump when I run insmod pt verbose=1:
>
> [> [root@server /dev]# insmod pt verbose=1
> pt: pt version 1.04, major 96
> pt0: epat: port 0x378, mode 0, ccr 0, test=(196,190,0)
> pt0: epat: port 0x378, mode 1, ccr 0, test=(192,199,0)
Interesting. Communication with the EPAT chip is working fine, but
accessing the device registers is not working. Do you have access
to Linux on a machine with an EPP port ?
It does seem like there is a new EPAT chip (rev c7) that some products
are starting to use. Unfortunately, I have yet to locate anything with
this chip and a DOS driver - nor have I been able to get a spec for it.
But don't panic yet - we don't know if you have a c7 chip or just an
incompatible parallel port.
--------------------------------------------------------------------------
Grant R. Guenther grant@torque.net
--------------------------------------------------------------------------
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Sun 04 Apr 1999 - 09:07:12 EDT