Marek Mentel (mmark@panda.ichpw.zabrze.pl)
Mon, 26 Apr 1999 11:20:36 -0400 (EDT)
Still without succes in instaling IQ Freecom CD :((
Paralel port is set in BIOS to EPP mode ( EPP 1.7 or 1.9 )
Printer test with lp0 works ok
>insmod paride
>insmod friq
>insmod pcd verbose=1
pcd: pcd version 1.05s, major 46, nice 0
pcd0: friq: port 0x3bc, mode 0, test=(255,255,128)
pcd0: friq: port 0x3bc, mode 1, test=(255,255,128)
pcd0: friq: port 0x378, mode 0, test=(255,256,0)
pcd0: friq: port 0x378, mode 1, test=(255,256,0)
pcd0: friq: port 0x378, mode 2, test=(255,256,128)
pcd0: friq: port 0x378, mode 3, test=(255,256,128)
pcd0: friq: port 0x378, mode 4, test=(255,256,128)
pcd0: friq: port 0x278, mode 0, test=(255,255,128)
pcd0: friq: port 0x278, mode 1, test=(255,255,128)
pcd0: friq: port 0x278, mode 2, test=(255,255,128)
pcd0: friq: port 0x278, mode 3, test=(255,255,128)
pcd0: friq: port 0x278, mode 4, test=(255,255,128)
pcd0: friq: port 0x268, mode 0, test=(255,255,128)
pcd0: friq: port 0x268, mode 1, test=(255,255,128)
pcd0: friq: port 0x268, mode 2, test=(255,255,128)
pcd0: friq: port 0x268, mode 3, test=(255,255,128)
pcd0: friq: port 0x268, mode 4, test=(255,255,128)
pcd0: friq: port 0x27c, mode 0, test=(255,255,128)
pcd0: friq: port 0x27c, mode 1, test=(255,255,128)
pcd0: friq: port 0x26c, mode 0, test=(255,255,128)
pcd0: friq: port 0x26c, mode 1, test=(255,255,128)
pcd0: Autoprobe failed
pcd: No CDrom drive found
In desperation , I have made DOS boot disk
and checked DOS drivers - works OK
IQ adapter and CD was found with messages like this ;
PW-CD : Mode E0 at port 378h
Drive Toshiba CD XM-6402B
The disc with DOS drivers contains :
The volume label in drive A is IQ840DOS.
The Volume Serial Number is 1013:11F9.
Directory of A:\
CDPLAYER COM 10011 97-02-07 19:45
DELO TX$ 13898 98-01-13 13:22
DEVICE COM 3502 91-05-30 20:13
DISK1 5 96-08-09 1:30
DISK1 IDN 1 93-10-21 11:17
FCATAPI SYS 18371 98-03-13 16:47
FCFORMAT EXE 21179 98-07-21 13:59
FCINST EXE 151416 97-10-29 12:18
FCINST INI 612 98-10-17 18:15
FCLSPAR SYS 28142 98-09-16 11:42
FCPOINT EXE 31080 98-02-12 18:50
FCPOINT INI 972 98-02-12 18:50
G613 SYS 31034 96-03-28 16:04
G735 SYS 34972 97-09-05 7:35
INFO TXT 48562 98-05-28 16:47
LANGUAGE TX$ 70902 97-10-29 16:37
MSCDEX EXE 25513 94-05-31 6:22
POINT749 INI 903 97-05-20 15:38
POWER-CD SYS 33060 98-10-09 19:45
STARTPA BAT 70 97-08-14 11:39
TXTSETUP OEM 274 98-09-17 10:10
UNINST EXE 29740 97-03-10 13:20
22 file(s) 554219 bytes used
898048 bytes free
But linux still refuse to recognize cdrom :
What else can I check / change ?
--------------------------------------------------------
Marek Mentel mmark@koala.ichpw.zabrze.pl 2:484/3.8
INSTITUTE FOR CHEMICAL PROCESSING OF COAL , Zabrze , POLAND
NOTE: my opinions are strictly my own and not those of my employer
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Mon 26 Apr 1999 - 06:22:04 EDT