Noli Santos, Jr. (nsantos@downcity.net)
Mon, 26 Apr 1999 20:41:05 +0500 (GMT-5)
Hello,
I'm running Linux 2.2.3 with an HP 7200e. I have multiple Ricoh cd-rw
that I can blank fine. When I try to blank the "free" cd-rw that came
with the drive I get the following messages. What am I doing wrong?
The CD-RW blanks fine under Win98 (so a friend tells me using an 8200i).
Thanks,
ns
kookoo3:~# insmod paride
paride: version 1.04 installed
kookoo3:~# insmod epat
paride: epat registered as protocol 0
kookoo3:~# insmod pg
pg: pg version 1.02, major 97
pg0: Sharing parport0 at 0x378
pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 5 (EPP-32), delay 1
pg0: HP CD-Writer+ 7200, slave
Everything loaded fine. Then
kookoo3:~# cdrecord blank=all -v speed=1 dev=0,0
Cdrecord release 1.6.1 Copyright (C) 1995-1998 J<F6>rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7200 '
Revision : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Current Secsize: -1
cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Blanking entire disk
cdrecord: I/O error. blank unit: scsi sendcmd: retryable error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 19 00 08 07 04 A1 10 00 80 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0xA1 Qual 0x10 (vendor unique sense code 0xA1) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (valid) error refers to data part, bit ptr 0 (not
valid) field ptr 0
cmd finished after 15.150s timeout 9600s
cdrecord: Cannot blank disk, aborting.
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Mon 26 Apr 1999 - 21:09:44 EDT