Tim Waugh (tim@cyberelk.demon.co.uk)
Wed, 26 May 1999 19:59:25 +0100 (GMT)
On Wed, 26 May 1999, Steffen Koehler wrote:
> - if a device is connected and the device is in EPP mode, the EPP timeout
> will never happen, because the EPP cycle is always completed. The EPP
> mode can't be detected in this case.
>
> Hardware: ExSys EX 4076 Multi IO card, ham radio EPP fifo modem
>
> Is there any new driver patch to solve this problem ?
Steffan,
Please take a look at 2.3.3 patched with
<URL:ftp://ftp.torque.net/pub/parport/patch-2.3.3-tmw1.gz>. It has
another EPP detection method. You could try back-porting it to 2.2 and
see if that makes any difference.
There's currently no way of forcing parport_pc to believe that a port has
a particular mode, although perhaps there should be.
Tim.
*/
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 26 May 1999 - 15:40:08 EDT