[PARPORT] Lava PCI + ZIP 100 drive together ??

Peter Balint (balint@sci.fi)
Sat, 5 Jun 1999 11:42:42 +0300

On bootup, the ZIP drive is at first recognized, but during the boot process
later, it is "unrecognized" The boot.msg file contains this

<6>parport0: PC-style at 0xe800 [SPP,PS2,EPP]
<7>parport0: cpp_daisy: aa5500ff(38)
<7>parport0: assign_addrs: aa5500ff(38)
<7>parport0: Peripheral not IEEE1284 compliant (0x7E)
<7>0x378: CTR: wrote 0x0c, read 0xff
<7>0x378: DATA: wrote 0xaa, read 0xff
<6>parport1: PC-style at 0x378 [SPP,PS2]
<7>parport1: cpp_daisy: aa5500ff87(b8)
<7>parport1: assign_addrs: aa5500ff87(b8)
<7>parport1: Peripheral not IEEE1284 compliant (0xFF)


<4>ppa: Found device at ID 6, Attempting to use EPP 32 bit
<4>ppa: Communication established with ID 6 using EPP 32 bit
<4>scsi0 : Iomega VPI0 (ppa) interface
<4>scsi : 1 host.
<4> Vendor: IOMEGA Model: ZIP 100 Rev: L.01
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Detected scsi removable disk sda at scsi0, channel 0, id 6, lun 0
<4>scsi : detected 1 SCSI disk total.
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB]
<4>sda: Write Protect is off
<4>Partition check:
<4> sda:SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 27010000
<4>scsidisk I/O error: dev 08:00, sector 0
<4> unable to read partition table

After this the disk is totally unremovable, only booting to Win9x helps :-(

The kernel is 2.2.9 with patches patch-2.2.9-tmw3.gz and patch-2.2.9-ac1.gz

Any help is much appreciated



-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --

This archive was generated by hypermail 2.0b3 on Sat 05 Jun 1999 - 04:52:33 EDT