Tim Waugh (tim@cyberelk.demon.co.uk)
Sat, 5 Jun 1999 16:48:37 +0100 (GMT)
On Sat, 5 Jun 1999, Peter Balint wrote:
> On bootup, the ZIP drive is at first recognized, but during the boot process
> later, it is "unrecognized" The boot.msg file contains this
>
> <6>parport0: PC-style at 0xe800 [SPP,PS2,EPP]
> <7>parport0: cpp_daisy: aa5500ff(38)
> <7>parport0: assign_addrs: aa5500ff(38)
> <7>parport0: Peripheral not IEEE1284 compliant (0x7E)
> <7>0x378: CTR: wrote 0x0c, read 0xff
> <7>0x378: DATA: wrote 0xaa, read 0xff
> <6>parport1: PC-style at 0x378 [SPP,PS2]
> <7>parport1: cpp_daisy: aa5500ff87(b8)
> <7>parport1: assign_addrs: aa5500ff87(b8)
> <7>parport1: Peripheral not IEEE1284 compliant (0xFF)
What's in /proc/cmdline? It seems like you've actually specified 0xe800
and 0x378 as base addresses, and you shouldn't need to.
> <4> sda:SCSI disk error : host 0 channel 0 id 6 lun 0 return code = 27010000
> <4>scsidisk I/O error: dev 08:00, sector 0
> <4> unable to read partition table
I think this might be fixed in David's new PPA release (2.04).
Tim.
*/
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Sat 05 Jun 1999 - 11:55:11 EDT