Daniel in Oregon (firstname.lastname@example.org)
Sun, 13 Jun 1999 18:35:38 -0700
My first day on the list and I get an anouncement about exactly what I
was looking for.
beta Drivers for my old epst.c (Syquest SyJet)...with scsi emulating
on a parport...
sigh....the only bad part is...it is WAAAAAAAAAAYYY over my head...
I was up to just compiling the old epst.c...and epst.h files...then
mount -t msdos /dev/sda1 /mnt/syquest
But this beta driver thing asks me to patch the kernel it took me all
weekend just to
I do finally have paride and parport in the kernel...and epat...don't
suppose there is a way
I can get them to work with the SyJet?
On boot i get these messages...
parport0: PC-style at 0x378 [SPP,ECP,ECPPS2]
parport0: no IEEE-1284 device present.
paride: epat registered as protocol 0
pd: pd version 1.05, major 45, cluster 64, nice 0
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
pda: Autoprobe failed
pd: no valid drive found
When I insmod paride and epat....
then try to mount pda........it says /dev/pda has wrong major or minor
I'm flailing wildly I know....:)
Any help would be appreciated...
-- To unsubscribe, send mail to: email@example.com --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Sun 13 Jun 1999 - 21:41:18 EDT