Michele Bini (mibin@tin.it)
Wed, 16 Jun 1999 19:28:05 +0000
On Wed, Jun 16, 1999 at 02:18:19AM +0300, Juha Sahakangas wrote:
> On Tue, 15 Jun 1999, Michele Bini wrote:
>
> > Cool!
>
> Very cool, indeed.
>
> > After patching the sane driver I finally got my
> > scanner (a Phantom 336 CX, whose SCSI version
> > (if it exists) wasn't explicitly supported by
> > SANE) to scan.
>
> How, exactly?
I attach the patch.
> I have Phantom 330CX, and i'd love to get it working too.. model numbers
> are very near, maybe they work with same drivers too, then.
the model_code used by the sane driver may be the same, as the
onscsi module detects my scanner as a 330 CX, even if it is
externally labelled in a different way.
> When i load the onscsi-module i get the following information out:
>
> ppSCSI 0.90 (0.90) installed
> onscsi.1: onscsi 0.90 (0.90), OnSpec 90c26 at 0x378 mode 0 (Nybble) dly 1
> nice 0 sg 16
> scsi1 : onscsi
> scsi : 2 hosts.
> Vendor: Model: scanner 330CS Rev: 1.28
> Type: Scanner ANSI SCSI revision: 02
> Detected scsi generic sgc at scsi1, channel 0, id 2, lun 0
seems good
> So it is detected and the parscsi-module probably works, but the sane
> doesn't find it.
try using "microtek2:/dev/sg?" as sane device
-Michele
This archive was generated by hypermail 2.0b3 on Wed 16 Jun 1999 - 13:33:15 EDT