Re: [PARPORT] Setting up a second parallel port

Tim Waugh (tim@cyberelk.demon.co.uk)
Sat, 19 Jun 1999 19:45:43 +0100 (GMT)

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: Jonathan Sturges: "Re: [PARPORT] DEC Alpha troubles again (2.2.5, SyQuest ezflyer)"
• Previous message: Alan Cox: "Re: [PARPORT] ECP mode for printers"
• In reply to: David Campbell: "Re: [PARPORT] ECP mode for printers"
• Next in thread: Dries van Oosten: "Re: [PARPORT] Setting up a second parallel port"

On Wed, 16 Jun 1999, David Campbell wrote:

> > I tried it by insmod-ing parport and parport_pc with various io_ranges and
> > irq's as options, but when I cat /proc/ioports, there is no parallel port
> > there. What do I do wrong.
> >
> > Here some info about my system:
> > motherboard: SE440BX-2 (Seatle)
> > cpu: pii 350
> > linux distribution:RH6.0
> > kernel version: 2.2.9
> >
> > The parallel port card is a jumperless isa card manifactured by tornado.

It won't appear in /proc/ioports until it's used. Look in /proc/parport,
or type 'dmesg'.

Tim.
*/

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --

• Next message: Jonathan Sturges: "Re: [PARPORT] DEC Alpha troubles again (2.2.5, SyQuest ezflyer)"
• Previous message: Alan Cox: "Re: [PARPORT] ECP mode for printers"
• In reply to: David Campbell: "Re: [PARPORT] ECP mode for printers"
• Next in thread: Dries van Oosten: "Re: [PARPORT] Setting up a second parallel port"

This archive was generated by hypermail 2.0b3 on Sat 19 Jun 1999 - 14:57:59 EDT