Piero Cioni (cloquil@geocities.com)
Thu, 29 Jul 1999 13:32:58 +0100
Hello all.
I'm trying to install both an LS-120 and a ZIP on the same interface (it
uses EPAT protocol).
With a single device all is OK. When I try to connect both them with:
#insmod paride
>paride: version 1.04 installed
#insmod epat
>epat: registered as protocol0
#insmod pf drive0=0x278,0,0,-1,0 drive1=0x278,0,0,-1,1
>pf: pf version 1.04, major=47, cluster=64, nice=0
> pf0: sharing parport 0 at 0x278
[recognizes epat protocol and master device]
> pf1: sharing parport 0 at 0x278
[recognizes epat protocol and slave device]
So I think pf.o detects both devices, but when I try (for example)
#mount /dev/pf0 /mnt/LS
I get a lot of error messages like :
>pf0: identify command phase error
>pf0: request sense before command: alt=0x58 stat=0x58 err=0x100
loop=160001 phase=85
and many other really similar, probably depending from the first
failure.
What should I do ?
Thanks.
I'm not subscribed to the list, so please CC to cssl@geocities.com .
BYtE,
Diego.
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Thu 29 Jul 1999 - 07:33:06 EDT