Jörg Schöpel (Schoepel.Nord@t-online.de)
Wed, 17 Nov 1999 11:10:59 +0100
Dear friends,
I've tried insmod parport, insmod paride, insmod frpw, insmod pcd verbose=1
with and without initialising the dosdriver and starting with loadlin, before I
wrote to this mailinglist. And I' ve read the historical list, but I could not
find an answer to my question:
Is it possible to use a freeport CD-Star under Linux?
Freeport Comware later became Freecom. The driver is found at
the Freecom-homepage under classic. My notebook is a Thinkpad 755C and linux
woks fine on it.
Here is the message after doing the insmod-commands:
paride: version 1.04 installed
paride: frpw registered as protocol 0
pcd: pcd version 1.07, major 46, nice 0
parport0: PC-style at 0x3bc, irq 7 [SPP,PS2]
parport0: no IEEE-1284 device present.
pcd: pcd version 1.07, major 46, nice 0
pcd0: 0x3bc is parport0
pcd0: frpw: port 0x3bc, chip 0, mode 0, test=(255,255,128)
pcd0: frpw: port 0x3bc, chip 0, mode 1, test=(255,255,128)
pcd0: frpw: port 0x378, chip 0, mode 0, test=(255,255,128)
pcd0: frpw: port 0x378, chip 0, mode 1, test=(255,255,128)
pcd0: frpw: port 0x378, chip 0, mode 2, test=(255,255,128)
pcd0: frpw: Xilinx does not support mode 3
pcd0: frpw: Xilinx does not support mode 4
pcd0: frpw: Xilinx does not support mode 5
pcd0: frpw: port 0x278, chip 0, mode 0, test=(255,255,128)
pcd0: frpw: port 0x278, chip 0, mode 1, test=(255,255,128)
pcd0: frpw: port 0x278, chip 0, mode 2, test=(255,255,128)
pcd0: frpw: Xilinx does not support mode 3
pcd0: frpw: Xilinx does not support mode 4
pcd0: frpw: Xilinx does not support mode 5
pcd0: frpw: port 0x268, chip 0, mode 0, test=(255,255,128)
pcd0: frpw: port 0x268, chip 0, mode 1, test=(255,255,128)
pcd0: frpw: port 0x268, chip 0, mode 2, test=(255,255,128)
pcd0: frpw: Xilinx does not support mode 3
pcd0: frpw: Xilinx does not support mode 4
pcd0: frpw: Xilinx does not support mode 5
pcd0: frpw: port 0x27c, chip 0, mode 0, test=(255,255,128)
pcd0: frpw: port 0x27c, chip 0, mode 1, test=(255,255,128)
pcd0: frpw: port 0x26c, chip 0, mode 0, test=(255,255,128)
pcd0: frpw: port 0x26c, chip 0, mode 1, test=(255,255,128)
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
please help me or give me a link
thank you with kind regards
Jörg Schöpel
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 17 Nov 1999 - 05:44:26 EST