Jörg Schöpel (Schoepel.Nord@t-online.de)
Tue, 23 Nov 1999 10:10:55 +0100
Am Wed, 17 Nov 1999 schrieben Sie:
> Dear friends,
>
> I've tried insmod parport, insmod paride, insmod frpw, insmod pcd verbose=1
> with and without initialising the dosdriver and starting with loadlin, before I
> wrote to this mailinglist. And I' ve read the historical list, but I could not
> find an answer to my question:
>
> Is it possible to use a freeport CD-Star under Linux?
>
> Freeport Comware later became Freecom. The driver is found at
> the Freecom-homepage under classic. My notebook is a Thinkpad 755C and linux
> woks fine on it.
>
> Here is the message after doing the insmod-commands:
>
> paride: version 1.04 installed
> paride: frpw registered as protocol 0
> pcd: pcd version 1.07, major 46, nice 0
> parport0: PC-style at 0x3bc, irq 7 [SPP,PS2]
> parport0: no IEEE-1284 device present.
> pcd: pcd version 1.07, major 46, nice 0
> pcd0: 0x3bc is parport0
> pcd0: frpw: port 0x3bc, chip 0, mode 0, test=(255,255,128)
> pcd0: frpw: port 0x3bc, chip 0, mode 1, test=(255,255,128)
> pcd0: frpw: port 0x378, chip 0, mode 0, test=(255,255,128)
> pcd0: frpw: port 0x378, chip 0, mode 1, test=(255,255,128)
> pcd0: frpw: port 0x378, chip 0, mode 2, test=(255,255,128)
> pcd0: frpw: Xilinx does not support mode 3
> pcd0: frpw: Xilinx does not support mode 4
> pcd0: frpw: Xilinx does not support mode 5
> pcd0: frpw: port 0x278, chip 0, mode 0, test=(255,255,128)
> pcd0: frpw: port 0x278, chip 0, mode 1, test=(255,255,128)
> pcd0: frpw: port 0x278, chip 0, mode 2, test=(255,255,128)
> pcd0: frpw: Xilinx does not support mode 3
> pcd0: frpw: Xilinx does not support mode 4
> pcd0: frpw: Xilinx does not support mode 5
> pcd0: frpw: port 0x268, chip 0, mode 0, test=(255,255,128)
> pcd0: frpw: port 0x268, chip 0, mode 1, test=(255,255,128)
> pcd0: frpw: port 0x268, chip 0, mode 2, test=(255,255,128)
> pcd0: frpw: Xilinx does not support mode 3
> pcd0: frpw: Xilinx does not support mode 4
> pcd0: frpw: Xilinx does not support mode 5
> pcd0: frpw: port 0x27c, chip 0, mode 0, test=(255,255,128)
> pcd0: frpw: port 0x27c, chip 0, mode 1, test=(255,255,128)
> pcd0: frpw: port 0x26c, chip 0, mode 0, test=(255,255,128)
> pcd0: frpw: port 0x26c, chip 0, mode 1, test=(255,255,128)
> pcd0: Autoprobe failed
> pcd: No CD-ROM drive found
>
> please help me or give me a link
>
> thank you with kind regards
>
> Jörg Schöpel
>
Hello out there,
is my question to stupid or has no one time to help me? :-)
Please help me.
thank you
Jörg Schöpel
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Tue 23 Nov 1999 - 04:29:22 EST