[PARPORT] HP External CD-Writer probs

Pedro Fradique da Silva (fradique@ipimar.pt)
Wed, 17 Nov 1999 17:57:01 +0000

Hi all,
I'm trying to burn a cd to an HP 7500e.(external through paralel port)
I do:
modprobe parport
moprobe epat
modprobe pg
then check lsmod and the modules are loaded and using one another.
I can even do 'mount /dev/pcd0 /mnt/tmp' and it works fine.
I do a 'cdrecord -scanbus' and it gives me a list with the cdwriter on
it as SCSI id 0 on Bus 0(I have no other SCSI stuff)
Then, I make an image to write to the cd using 'mkisofs -r -o image
pedro/'
Check it with 'mount -t iso9660 -o ro,loop=/dev/loop0 image /mnt/tmp'
I finally use 'cdrecord dev=0,0 -data image' to burn the cd.
But it doesn't work.:(
I'm including a file(prob.txt) with the output, maybe someone can help
me out.
Thanks a lot in advance,
Pedro. 

-- 
E-Mail: fradique@ipimar.pt -- PGP Public Key available on demand


horus:~ # cdrecord dev=0,0 -data image
Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling
scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 7500 '
Revision       : '1.0a'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd:
retryable error
CDB:  1E 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes:
Sense Key: 0xFFFFFFFF [], Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 40s
cdrecord: CD/DVD-Recorder not ready.


--  To unsubscribe, send mail to: linux-parport-request@torque.net --
--  with the single word "unsubscribe" in the body of the message. --

This archive was generated by hypermail 2.0b3 on Wed 17 Nov 1999 - 13:04:28 EST