Frederic Soulier (frederic@wallaby.primex.co.uk)
Wed, 29 Dec 1999 17:49:31 +0000
Hi,
I have just bought a Castlewood Orb (// port) and I have some
problems to use it.
I am already using an Ezflyer230 and it works perfectly.
My config is:
- Linux Mandrake 6.1 (kernel 2.2.13)
- Ezflyer 230 connected on // port 0x278
(printer connected thru passthru on Ezflyer230)
- Orb connected on // port 0x378
at boot time, epat is recognized as protocol 0 and on26 is
recognized as protocol 1.
/etc/conf.modules
alias parport_lowlevel parport_pc
options parport_pc io=0x378,0x278 irq=none,none
alias block-major-45 pd
/etc/rc.d/rc.local
insmod parport
insmod parport_probe
insmod paride
insmod epat
insmod on26
insmod pd drive0=0x378,1 drive1=0x278,0
/etc/fstab (generated by linuxconf)
...
/dev/pdb1 /mnt/ezflyer vfat user,exec,dev,suid,rw,noauto 1,1
/dev/pda1 /mnt/orb vfat user,exec,dev,suid,rw,noauto 1,1
...
I have attached a file that shows the messages at boot time and when
the ezflyer is mounted (ok) and when the orb is mounted (fs pbm).
#mount -t vfat /dev/pda1 /dev/orb
note: on a windows machine the orb disk I am trying to read is
recognized as a FAT disk.
Any help much appreciated.
Fred
Dec 28 18:35:20 wallaby kernel: parport0: PC-style at 0x378 [SPP,PS2,EPP]
Dec 28 18:35:20 wallaby kernel: parport1: PC-style at 0x278 [SPP,ECP,ECPEPP,ECPPS2]
Dec 28 18:35:20 wallaby kernel: parport0: no IEEE-1284 device present.
Dec 28 18:35:21 wallaby kernel: parport1: no IEEE-1284 device present.
Dec 28 18:35:21 wallaby kernel: paride: version 1.04 installed
Dec 28 18:35:21 wallaby kernel: paride: epat registered as protocol 0
Dec 28 18:35:21 wallaby kernel: paride: on26 registered as protocol 1
Dec 28 18:35:21 wallaby kernel: pd: pd version 1.05, major 45, cluster 64, nice 0
Dec 28 18:35:21 wallaby kernel: pda: Sharing parport0 at 0x378
Dec 28 18:35:21 wallaby kernel: pda: on26 1.04, OnSpec 90c26 at 0x378, mode 4 (EPP-32), delay 1
Dec 28 18:35:21 wallaby kernel: pda: CASTLEWOOD ORB, master, 4307184 blocks [2103M], (4273/16/63), removable media
Dec 28 18:35:21 wallaby kernel: pdb: Sharing parport1 at 0x278
Dec 28 18:35:21 wallaby kernel: pdb: epat 1.01, Shuttle EPAT chip c3 at 0x278, mode 0 (4-bit), delay 1
Dec 28 18:35:21 wallaby kernel: pdb: SyQuest EZ230A, master, 450560 blocks [220M], (880/16/32), removable media
Dec 28 18:35:21 wallaby kernel: pda: pda1 < pda5 >
Dec 28 18:35:22 wallaby kernel: pdb: pdb1
Dec 28 18:35:23 wallaby rc: Starting local succeeded
Dec 28 18:36:36 wallaby PAM_pwdb[419]: (kde) session opened for user root by (uid=0)
Dec 28 18:37:10 wallaby kernel: pdb: SyQuest EZ230A, master, 450560 blocks [220M], (880/16/32), removable media
Dec 28 18:37:10 wallaby kernel: pdb: pdb1
Dec 28 18:37:15 wallaby kernel: pda: CASTLEWOOD ORB, master, 4307184 blocks [2103M], (4273/16/63), removable media
Dec 28 18:37:15 wallaby kernel: pda: pda1 < pda5 >
Dec 28 18:37:15 wallaby kernel: [MS-DOS FS Rel. 12,FAT 0,check=n,conv=b,uid=0,gid=0,umask=022,bmap]
Dec 28 18:37:15 wallaby kernel: [me=0x0,cs=0,#f=0,fs=0,fl=0,ds=0,de=0,data=0,se=0,ts=0,ls=0,rc=0,fc=4294967295]
Dec 28 18:37:15 wallaby kernel: Transaction block size = 512
Dec 28 18:37:15 wallaby kernel: VFS: Can't find a valid MSDOS filesystem on dev 2d:01.
Dec 28 17:37:30 wallaby kernel: pdb: SyQuest EZ230A, master, 450560 blocks [220M], (880/16/32), removable media
Dec 28 17:37:30 wallaby kernel: pdb: pdb1
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 29 Dec 1999 - 13:00:51 EST