Dreas van Donselaar (info@a2zis.com)
Tue, 25 Jan 2000 19:10:58 +0100
I have a problem getting my HP SureStore 6020 EP cd-writer to work with the Parport epst driver.
I think you need to know the following information to help me:
--------------------------------------------
# ls
epst.o ppscsi.o scsi_mod.o sg.o sr_mod.o
# insmod scsi_mod.o
# insmod sg.o
# insmod sr_mod.o
# insmod ppscsi.o
ppSCSI 0.91 (0.91) installed
# insmod epst.o
epst.1: epst 0.91 (0.91), Shuttle EPST at 0x378 mode 5 (EPP-32) dly
1 nice 0 sg
16
scsi0 : epst
scsi : 1 host.
Vendor: HP Model:
CD-Writer 6020 Rev: 1.07
Type: CD-ROM
ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: HP Model: CD-Writer
6020 Rev: 1.07
Type: CD-ROM
ANSI SCSI revision: 02
# ls /proc/scsi/epst
0
# cat /proc/scsi/epst/0
ident: epst 0.91
(0.91), Shuttle EPST
base port: 0x378
mode: 5
mode name: EPP-32
delay: 1
nice: 0
verbose: 0
quiet: 0
tot_cmds: 50
tot_bytes: 1668
tot_errs: 0
parport device: parport0
claimed: 0
# echo 'verbose=9' >0
# cat /proc/scsi/epst/0
ident: epst 0.91
(0.91), Shuttle EPST
base port: 0x378
mode: 5
mode name: EPP-32
delay: 1
nice: 0
verbose: 9
quiet: 0
tot_cmds: 50
tot_bytes: 1668
tot_errs: 0
parport device: parport0
claimed: 0
then: 22463
timeout: 26463
now:
62208
-------------------------------------------
The problem is I am unable to mount /dev/sg0. It doesn't find any device
attached to it. Does anybody here know what I am doing wrong?
Thanks a lot. I really appreciate your help.
-- Dreas van Donselaar info@a2zis.com A2Z Internet Solutions Molenlaan 73 3055 EH Rotterdam The Netherlands-- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Tue 25 Jan 2000 - 13:16:59 EST