I managed to install drivers for HP CD-Writer+ 7100 on my Redhat6.0 system.
This is the information from the console:
paride: version 1.04 installed
paride: epat registered as protocol 0
pg: pg version 1.02, major 97
pg0: Sharing parport0 at 0x378
pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 2 (8-bit), delay 1
pg0: HP CD-Writer+ 7100, slave
The problem is, i don't know how to mount it?
I have tried:
mount -t iso9660 /dev/parport /mnt/cdrom
mount -t iso9660 /dev/parport0 /mnt/cdrom
mount -t iso9660 /dev/parport1 /mnt/cdrom
mount -t iso9660 /dev/parport2 /mnt/cdrom
mount -t iso9660 /dev/pg /mnt/cdrom
mount -t iso9660 /dev/pg0 /mnt/cdrom
mount -t iso9660 /dev/pg1 /mnt/cdrom
And the answer is always the same:
# mount -t iso9660 /dev/pg0 /mnt/cdrom
mount: /dev/pg0 is not a block device
How can i mount it?
-- To unsubscribe, send mail to: email@example.com --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Feb 24 2000 - 07:44:20 EST