hai ,
Thanx for ur advice. I've able to find the find the io address and
irq no. of my m/c. But yet found difficult in configuring the printer.
The configuration i've tried is as given:
1. insmod parport.o
2. insmod parport_pc.o io=0x378 irq=7
after this the printer gets activated.
3. insmod parport_probe.o
after this probe the files are as below:
/proc/parport/0/autoprobe:
CLASS:PRINTER;
MODEL:HP DeskJet 200;
MANUFACTURER:Hewlett-Packard;
/proc/parport/0/devices: (nothing in this file)
/proc/parport/0/hardware:
base: 0x378
irq: 7
dma: none
modes: SPP,PS2
/proc/parport/0/irq:
7
4. insmod lp.o parport=0
5. Next i've did trying printtool
When i try to print the testpage in printtool, its printing only one
line.
if i give some other text file for printing also its the same problem.
i've tried cat test > /dev/lp0 and lpr test.
Both giving same results.
Pl advice,
..............................................................Cheers,
Murali
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Tue Apr 25 2000 - 23:13:15 EDT