Tim,
Following is the information you requested. Thanks for any help
with this.
John
Output from uname -r ..
2.2.14-5.0
Output from lspci -nv ..
00:00.0 Class 0600: 1022:7006 (rev 25)
Flags: bus master, medium devsel, latency 64
Memory at f4000000 (32-bit, prefetchable)
Memory at fa8ff000 (32-bit, prefetchable)
I/O ports at fff4 [disabled]
Capabilities: [a0] AGP version 1.0
00:01.0 Class 0604: 1022:7007 (rev 01)
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa900000-fe9fffff
Prefetchable memory behind bridge: ee700000-f27fffff
00:07.0 Class 0601: 1022:7408 (rev 01)
Flags: bus master, medium devsel, latency 0
00:07.1 Class 0101: 1022:7409 (rev 03) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at cb00
00:07.3 Class 0680: 1022:740b (rev 03)
Flags: medium devsel
00:07.4 Class 0c03: 1022:740c (rev 06) (prog-if 10)
Flags: bus master, medium devsel, latency 16, IRQ 10
Memory at febff000 (32-bit, non-prefetchable)
00:11.0 Class 0701: 131f:2020 (prog-if 02)
Subsystem: 131f:2020
Flags: medium devsel, IRQ 11
I/O ports at ffe0
I/O ports at fff0
Capabilities: [a0] Power Management version 1
00:13.0 Class 0200: 11ad:c115 (rev 25)
Subsystem: 11ad:c001
Flags: bus master, stepping, fast Back2Back, medium devsel,
latency 64, IRQ 9
I/O ports at f800
Memory at febfef00 (32-bit, non-prefetchable)
Expansion ROM at feb80000 [disabled]
Capabilities: [44] Power Management version 1
00:14.0 Class 0200: 11ad:c115 (rev 25)
Subsystem: 11ad:c001
Flags: bus master, stepping, fast Back2Back, medium devsel,
latency 64, IRQ 5
I/O ports at f400
Memory at febfee00 (32-bit, non-prefetchable)
Expansion ROM at feb40000 [disabled]
Capabilities: [44] Power Management version 1
01:05.0 Class 0300: 121a:0005 (rev 01)
Subsystem: 121a:104d
Flags: 66Mhz, fast devsel, IRQ 11
Memory at fc000000 (32-bit, non-prefetchable)
Memory at f0000000 (32-bit, prefetchable)
I/O ports at e800
Expansion ROM at fe9f0000 [disabled]
Capabilities: [54] AGP version 1.0
Capabilities: [60] Power Management version 1
Tim Waugh wrote:
>
> On Thu, Jun 15, 2000 at 03:18:23PM -0400, John Morey wrote:
>
> > I have a box running RedHat-6.2 that I need to add a second parallel
> > port to but it does not have any ISA slots. I have tried adding a
> > SIIG CyberParallel PCI card but I have been unable to get it to
> > work. The device not configured error that I got when cating a file
> > to /dev/lp1 went away but now the cat command just hangs and nothing
> > prints. Should the SIIG card be able to work with RedHat-6.2? If
> > it should be able to work is there a document that would help me set
> > it up? If it just will not work what are my other options to get a
> > second parallel port on a box that does not have any ISA slots.
>
> What do 'uname -r' and 'lspci -nv' say?
>
> Tim.
> */
>
> ------------------------------------------------------------------------
> Part 1.2Type: application/pgp-signature
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Fri Jun 16 2000 - 15:05:16 EDT