>From: Andrew Godfrey <twoag@netscape.net>
>I'm trying to use mkisofs & cdrecord (Version 1.8.1) to backup my linux
>system, Red Hat, 2.2.12-20, Toshiba Satellite 2060 CDS laptop using an HP=
>cdwriter plus series 7000. =
>I get the following error: write track data: error after 5308416 bytes:
>I've tried changing my parallel port bios setting to St Bi-direct and ECP=
> (I
>don't have an EPP option). I've tried setting speed to 0 on the command l=
>ine.
>ie cdrecord -v speed=3D0, dev=3D0,0 -isosize -data data.raw without succe=
>ss.
>Have attached the output of cdrecord. Can any one help or does anyone hav=
>e any
>suggestions. =
This is a bufer underrun! Follow the instructions in README.parallel
>____________________________________________________________________
>Get your own FREE, personal Netscape WebMail account today at http://webm=
>ail.netscape.com.
>------NetAddressPart-00--=_Peta6752S0m58c90ab9
>Content-Type: text/plain; name="error.txt"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline; filename="error.txt"
>Cdrecord 1.8.1 (i586-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
>TOC Type: 1 = CD-ROM
>scsidev: '0,0,0'
>scsibus: 0 target: 0 lun: 0
>Using libscg version 'schily-0.1'
>atapi: 1
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 1
>Vendor_info : 'HP '
>Identifikation : 'CD-Writer+ 7500 '
>Revision : '1.0a'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Drive buf size : 1040128 = 1015 KB
>FIFO size : 4194304 = 4096 KB
>Track 01: data 20 MB
>Total size: 23 MB (02:17.94) = 10346 sectors
>Lout start: 23 MB (02:19/71) = 10346 sectors
>Current Secsize: 2048
> ATIP start of lead in: -11625 (97:27/00)
> ATIP start of lead out: 335100 (74:30/00)
>Disk type: phase change
>Manuf. index: 0
>Manufacturer: Illegal Manufacturer code
>Blocks total: 335100 Blocks current: 335100 Blocks remaining: 324754
>RBlocks total: 353448 RBlocks current: 353448 RBlocks remaining: 343102
>Starting to write CD/DVD at speed 2 in dummy mode for single session.
>Last chance to quit, starting dummy write in 9 seconds.
>Waiting for reader process to fill input buffer ... input buffer ready.
>Starting new track at sector: 0
>
Track 01: 0 of 20 MB written.
Track 01: 1 of 20 MB written (fifo 100%).
Track 01: 2 of 20 MB written (fifo 75%).
Track 01: 3 of 20 MB written (fifo 50%).
Track 01: 4 of 20 MB written (fifo 25%).
Track 01: 5 of 20 MB written (fifo 100%).CDB: 2A 00 00 00 0A 20 00 00 10 00
>Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 00 00
>Sense Key: 0x3 Medium Error, Segment 0
>Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
>Sense flags: Blk 0 (not valid)
>write track data: error after 5308416 bytes
>Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
>CDB: 35 00 00 00 00 00 00 00 00 00
>Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 00 00
>Sense Key: 0x3 Medium Error, Segment 0
>Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.003s timeout 120s
>Trouble flushing the cache
>Writing time: 27.925s
>Fixating...
>WARNING: Some drives don't like fixation in dummy mode.
>Fixating time: 0.007s
>CDB: 55 10 00 00 00 00 00 00 10 00
>Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 80 00 07
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
>Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 0 (not valid) field ptr 7
>cmd finished after 0.006s timeout 40s
>------NetAddressPart-00--=_Peta6752S0m58c90ab9--
>-- To unsubscribe, send mail to: linux-parport-request@torque.net --
>-- with the single word "unsubscribe" in the body of the message. --
Jörg
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.gmd.de (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sun Jul 16 2000 - 05:30:10 EDT